开云体育

This is an old problem with generating a signal from within a device. The sound stops going where it should if before, for example, the ATU tuning worked. Those. if you enabled the ATU tuning, then

Good video on how to apply 20.1 patch. No problem configuring Locator and Call sign and it seems to decode FT8 fine. But on CQ/transmit, it does NOT put out any power (set to 5 W). Outputs power

Oleg, thank you very much for your work on this firmware.? Good luck with your projects. -- Phil W7PJH

"Use serial console, Luk" (;

Typo above ... for 80M it,s #./modify_band.sh 2 F5VCV

Given that I don't have a keyboard on my X6100, I HAVE NOT TESTED THESE SCRIPTS ON THE RADIO. They work on my linux box. the List-Band-IDs.sh will list the id keys for each band and the current band

I later realized I could just go into settings and turn it on ear phones. And this is incredibly convenient, solving my problem.

I made an update system via fat partition a long time ago. And I didn’t expect that it would be so difficult for users. Now, to do the same for USB, you need to make changes in the firmware itself.

Thank you Oleg?

Why do you need an external computer with Linux when you already have one in the form of an X6100? (; The firmware already contains the sqlite3 utility. All you need is to use the SQL UPDATE command

Jens, I don't believe there is any way the software can control the power to the HOST USB C port where your GPS Dongle should be plugged into. I believe that USB power is a directly wired connection

Sage advice ?

I have managed to edit the bands on Oleg's excellent firmware. Here's a basic procedure: Prerequisite. a: A PC running Linux with some sort of SD card reader. b: A pretty good knowlege of Linux.?

That happened on my unit but with the Key jack. It is mounted identically as the speaker/phone jack and it’s a joke. The printed circuit traces on the board are the only thing holding these jacks

Oleg ... with using the patch vers. 0.20.1 the USB GPS-Dongle get no more power and the GPS-Dongle is not more working . 73 , Jens / HB9JOI +++ Sent: Thursday, March 21, 2024 7:40 AM To:

...ok , I understand very good . -----Ursprüngliche Nachricht----- Sent: Wednesday, March 20, 2024 2:59 PM To: [email protected] Subject: Re: [xiegu-x6100] Patch version 0.20.1

You’re going to have to reflow the pcb solder connections on the audio jack or possibly replace the jack entirely. My understanding of the current state of Xiegu’s Bluetooth implementation is

Anyone have the ability to image their card after the update to share? -Daniel ________________________________ Sent: Thursday, March 21, 2024 9:57 AM To: [email protected]

Hi all, My S/P socket has worked lose and I do not think it is properly connected to the PCB anymore. I have also lost sound on the speaker. Any ideas if I can: 1- Bypass the socket to get the

I've done it 4 times with 2 different sd cards (2gb & 32GB) and upon reboot after the Wolf Logo the screen stays black, microphone LEDs show button pushes, but it is clear that the screen projection