开云体育

The Komunica Pro vertical antenna, mentioned in this thread by Dido, EA1CN, is called, on my side of the “big lake”, GRA-7350TC 3/8-24 3/8" x24 CB HF 3.5MHz 7-30MHz/50MHz Broadband Telescopic

Thanks—I found link.

I had trouble getting CAT control to work with the stock firmware, but with the R1CBU firmware it "just works".? I don't even bother using the stock firmware anymore, and just use R1CBU all the time

Hi Alex, I found an adapter on eBay. Search for "X6100 HEADSET PTT" on eBay. 73, Scott

In the it‘s quite simple, as it runs from as card, test it and after this your favorite firmware vy 73 de Klaus, DC2JR Von meinem iPhone gesendet Am 17.02.2024 um 14:18 schrieb W8ISM via groups.io

For me and my poor eyesight it's the readable power level and ALC (shown in the usual format, 0 being none). Of course there are other things, but that is a huge plus.

Well, I think, it has to do something with like /dislike the usage. I for myself don‘t like the r1cbu look and feel and like very much the original firmware vy 73 de Klaus, DC2JR Von meinem iPhone

tnx to u both for replies and encouragement Dido and i r on same page when it comes to operating styles and Wintle, most of the time i can get the right info onto a SD... sure wish i had a young nerd

The important thing to realize about the R1CBU firmware is that you're NOT CHANGING anything on the radio itself. There's no commitment and nothing you can screw up on the radio. It's harmless and

so better for CW, message memories ? as the message memories seem to work fine with stock firmware …. Yes! R1CBU Firmware have a lot of memorias and (attention) have Beacon and differents times for

tnx Dido.... so better for CW, message memories ? as the message memories seem to work fine with stock firmware -- 72's de k8zf, randy

Yes. R1CBU firmware and for CW is another world. Shure! Saludos. Diego. EA1CN

'have been using the 6100 for bout 2 weeks now , and reading? many posts here. are there any important advantages to using 3rd party firmware? i'm not a softwaare guru and have no interest in

II bought my radio from Radiodidty recently and it came with *APP: V1.1.7* Aug 25, 2023,15:09:46 *BASE: V1.1.6* Mar 7 2023,09:57:03. My SWR meter works great. You're on 1.1.6, which Xiegu says is

Hi Mike, I am not using FT8. In general I?d stick to the firmware that best does work for you and not hunt at each new firmware.

Klaus, thank you, that is good to know. Do you run FT8 with CAT control using WSJT-X on your computer using V1/!.!7?? It works fine for me using V1.1.16. I just want to be sure that moving up to the

I just tested it using the latest firmware (APP - V1.1.7 Aug 25 2023, 15:09:46, BASE - V1.1.6 Mar 7 2023, 09:57:03) and did not have any issues using it. Your screen should look similar to the one

SWR Scan doesn't work on the X6100 I got in mid December 2023.? Will loading the latest firmware Xiegu firmware solve that problem or will using R1CBU firmware solve it?? This is the firmware I have

Has anybody used this iPhone app to do FT8 successfully? I can get it to decode but not transmit. I’m using a usb c cable and a lightning adapter.

Looking at the spec for the X6200 it does talk in one spec about 20W, but in others more about 5-10W. The G90 does 20W. From the grape vine it appears the X6200 will cost $1000, much more than the