开云体育

This power pack was recommended by KM9G on his YouTube channel but it doesn't have enough source current at 12V as shown in the video One Battery for Ham-Travel! (youtube.com (

The X6100 works best with al voltage around 10 Volt. Higher voltages just mean more waste heat development inside the rig. I f you are considering to use an external battery IMHO best is to build or

Ok , sorry Oleg . I see there it works ... But , maybe my X6100 is defect ... I don`t know . With me here 0.19.0 CW decoder works not . I don`t know why . Please send me Your dedcoder settings ... 73

Mark, I have that power bank as well. Note that is a 22.5W device. At 12V, it will provide something less than 2A. A recent post showed being able to get 10W with V down to about 9V. I recently

You probably got this hoping to not have to bring along an external battery, but do keep in mind that even with a good internal battery you are limited to 5 watts.? If you're doing any kind of

Hello All. This is my first post to this group, and I thought I'd post my experiences with the X6100 with respect to the battery. I am the second owner of my X6100. The history of the radio is that it

Еverything is working (; https://youtu.be/14EJOUVcXQU

... if I like use CW with the cw decoder I put the vers. 0.17 sd-card in the x6100 and if I want the new features with FT8 / FT4 ect. ... I change and put the sd-card with vers. 0.19 in the trx .

In the science fiction story of the Strugatsky brothers from the times of the USSR, there was an episode when a reader wrote to a scientific journal: “I have been watching underground knocking in my

_Short_ press Lock button or SPCH/Lock button on HMic

Is there a simple way to lock the frequency? The lock button next to the VFO encoder does weird things. What am I missing? I love the firmware btu.

Thanks. I will try that.

It's very easy to forget about the power slider when using wsjt-x. Every band is different. I set my cmedia output level coming in off the USB connection to about 50% on the PC, then set the slider on

Yes, this is an old and well-known problem, I have written about it many times. Sometimes sound playback disappears if you switch to DIG modulation. So far I have not been able to overcome this. Only

Yes when the ATU finishes there is a kerchunk also. Seems to be some kind of a systems sound. However after some hours of trying out various options, it seems to happen only when the internal speaker

Sent: Sunday, January 14, 2024 9:36 PM To: [email protected] Subject: Re: [xiegu-x6100] New version 0.19.0 #R1CBU-Firmware Hi Oleg, First of all, thank you very much for your work. Some reports

Has to be something in the settings johnflinchbaugh@...> wrote:

I get a loud kerchunk/bong when ATU finishes when I have the AGC turned off. Does AGC affect your kerchunk with the mic as well? I hear it with R1BCU and with original software. wrote: -- John

Hi Oleg, First of all, thank you very much for your work. Some reports from me. CW decoding does work for me, but I didn't try 0.17 to compare. It really decodes a lot of 'T' and 'E' but in general it

I got my new X 6100 yesterday and set everything up for CW and FT 8 using external 13.5 V power supply. I made several FT8 contacts yesterday afternoon. This morning I turned on the new X 6100 using