开云体育

I got my new X 6100 yesterday and set everything up for CW and FT 8 using external 13.5 V power supply. I made several FT8 contacts yesterday afternoon. This morning I turned on the new X 6100 using

I work with this radio in the fields. Only with your own firmware. If it was I would have noticed. I checked now. I do not have that.

Hello all. Tried the R1CBU f/ware version 0.19.0. Very impressive, however after playing with it for a while? have an odd problem. Using the supplied Xiegu fist mike, when the PTT is released there

I finally received my dummy load , made some tests and the transceiver is working normally ... seemed to be an RF issue.. problem SOLVED? with an RF choke that I built following the instructions that

Im using the latest version and the CW decoder works for me.

Jens, I don't use CW so I can't help you there. With 0.19.0, I have no problem with my GPS USB Dongle. It works correctly, syncing my internal time to GPS. I did a write-up a while back that

https://www.youtube.com/watch?v=s3UX4OlHGKo :)))))))))

Only in version 0.17 the CW-decoder was very good working , in all later version the cw decoder works not ... !! Same is with GPS-Dongle: It works only good til version 0.17 , in later versions also

This all feels like good advice. I *can* get the ALC to kick in if I use the ATU, but doing so seems to carry a high risk of causing the USB ports to reset, despite putting chokes on every cable I can

Interesting.? Some months ago I read a post from Oleg saying for digital modes the ALC should be set about 8 using his R1CBU firmware, so that's what I've been using for several months now with no

I was confused for a while about ALC as well, since the x6100 is my first HF radio, and the ALC seems to be backward (starting at 100%) on Xiegu radios. With stock software: * I set the power where I

A general rule of thumb that applies equally to any rig is to preset the power output to some level (for example 4 watts) and then increase the TX audio gain (either via the rig or computer) until the

Hi all, I got an X6100 over the holidays and I feel like I'm losing my mind a bit trying to sort all the issues I've been having. I've gotten the bulk of them squared away, but I'm still having some

Thanks to the wayback machine, I completely forgot to try that! I now have the 0.17.1 version, so i'll have a go with it later this week. Thank you to all that replied and helped me get the elusive

Wayback machine for the win: https://web.archive.org/web/20230625214356/https://r1cbu.ru/index.php/home/files/summary/3-x6100/15-x6100-r1cbu-0-17-1

It MIGHT take a bit for it all to get thru the internet de KB9AVO <guillermo@...> wrote:

It worked for me this morning from this link here: https://r1cbu.ru/index.php/home/files/summary/3-x6100/17-x6100-r1cbu-0-19-0 I hope this works for you. 73 de PY2BIL

It sounds like you may have ruled this out, but erratic behavior as you describe is almost always a feedline issue such as corrosion or loose junctions. -- 73 de

Scott, that didn't work, nor will email I doubt as the file looks to be above 100mB, so way to large for most email attachments. You would have to upload it someplace, like Mega / Dropbox or

Thanks Michael, I'll give it a try. 73, Rick K8BMA wrote: