开云体育

It worked for me this morning from this link here: https://r1cbu.ru/index.php/home/files/summary/3-x6100/17-x6100-r1cbu-0-19-0 I hope this works for you. 73 de PY2BIL

It sounds like you may have ruled this out, but erratic behavior as you describe is almost always a feedline issue such as corrosion or loose junctions. -- 73 de K9NUD

Scott, that didn't work, nor will email I doubt as the file looks to be above 100mB, so way to large for most email attachments. You would have to upload it someplace, like Mega / Dropbox or

Thanks Michael, I'll give it a try. 73, Rick K8BMA wrote:

Erm, you are actually talking into the mic I presume, not just PTT? You need to talk for RF to go out!

Rick : I had a similar issue when first using my X6100 portable with my Alex Loop.? On a hunch I added a common mode choke to the feedline and then it behaved normally. So, this could be a sign of

I noticed recently that while sending CW, the X6100 SWR meter consistently reads about 1:1.1 to 1:1.2, but at the end of the sequence, it bounces to around 2.5. On slow CW, 10 wpm, it bounces on each

Get a shielded cable. ?Insert a USB ground loop isolator between the computer and transceiver. Move the transceiver further away from the computer. ?One or all of these suggestions should help with

Hello all, I am having an issue with the x6100, when I plug into the usb dev and into the computer running windows, it will show up two com ports working fine but when I try to use flrig or hrd

Dears, for them who familiar with Linux, I attach my log and commands of accessing the os and running a backup to SD card. As I'm new in the X6100 field, I'm not sure if already this infos not posted

The CAT interface is implemented in a GUI application. The BB version doesn't matter to it.

Here it is

I have the firmware, I have attached it to this post hopefully it's allowed. not email me at my orz email and I can send it you

Yes when I had a g90, I set the TCXO using my gpsdo, So I asked what others g90 clocks are like , or something like that, And he stopped the post saying it had nothing to do with the radio Then I went

I agree the g90 group is ruined. The moderator is a control freak and has made it near useless.

Hi Scott, Sorry I tried that page already, I get this! Tony.

Full SD image ( https://www.r1cbu.ru/index.php/home/files/download/3-x6100/15-x6100-r1cbu-0-17-1 )

Just a quick one re the R1CBU 0.1.71? version, I wonder if anyone still has a copy that they would be kind enough to upload please,?I have tried to find a working download location for it for quite

Michael, Welcome and thank you for taking this task upon you.. 73, Dick

Over 2 years ?have certainly seen RF issues on the USB and the Coax using EFHW antenna. I almost always run my USB through a toroid a few times to stop issues. I have clip on ferrites on my CW paddle