开云体育

Hi Terry as you have a New radio, can you please test the Built in Mic, and please tell me if it is working any good as my radio is about 1.5 years old now and the in built mic does not work very

I hate cellphones wrote:

stop_bits not stopbits Thanks for the info.

Hi Can you Please ask Xiegu for The FM mode to be corrected and CTCSS Tones to be added , and mic TX EQ to be added in the Next Firmware as FM quality is not good Also add Bluetooth audio as the radio

Perfect. Thanks.

Terry, There are numerous solutions. I picked up a MicrosoftSurface Go for $100 in Huntsville last August. I use it for my portable ops, logging and digital work. It can be charged of necessary via

It depends on the firmware. Mine has the ability to configure for different antennas and then simply switch to the desired antenna without re-tuning.

Hi I am using my Bluetooth For radio control, pocket rxtx app for android, and my touch pad works fine on my mini Bluetooth keyboard, Dave 2E0DMB wrote:

That's correct. Just like on the g90 the radio remembers all your tunes on a particular antenna. If you change antennas then you must do a retune. Also remember that not only do you need to tune on

Hi Oleg Thanks again for your help And great information, Thanks Dave

This is not possible now. I already wrote that all DSP processing occurs in the BB processor. The firmware of which is still closed. There have been works to decompile it, but it seems to me that it

Hi Oleg I think I know the answer, Is it possible to do a EQ for the mic input, As the tx filter is 2.5 cutoff, I could see this in the SDR RSP Due, or do I have to do some filtering in the mic

That’s what I do, at least until it’s working internally. [email protected]> wrote:

Lisa, I could not have explained it better. You are right on the mark when you answered Terry. Just remember one thing, you never hear from the thousands who are happy with their x6100. I'm

ttyACM1 is the cat control + PTT and ttyACM0 is for using minicom to login to the x6100. I used to use flrig and point all my digital apps to use flrig. But lately flrig hasn't been working too well

I still have no clue what to do with the Bluetooth capability. I use a Bluetooth adapter plugged into the audio jack so I can use an external Bluetooth speaker.?【Upgraded】 Aux Bluetooth 5.0...

If using Linux, the com ports pop up as ACM0 and ACM1, and it always seems to be the highest number ACM.? On split operation, I use fake it instead of none. You can just go with default on all three

Hi Oleg, Yes it is a shame that FM is not good, I did have a g90 and when they added FM to it, RX was ok, but FM tx audio was not great, With the 6100 tx audio is better than the Rx audio, Good

Yes, it has arrived. I only tested it for reception, I did not try it for transmission. I plan to do this one of these days. Now I'm stubbornly trying to overcome the problem of loss of sound

Go with the radio as is until you’ve had time to become well acquainted with it. The Xiegu factory GUI is very good. For the most part you will find it to be a very nice radio and a good value.