开云体育

Thanks everyone for the advice. I don't know if I would be able to make my own battery, but it's an exciting idea. Are there any good sources for learning? I also have doubts about how to choose the

Oops... Sorry for the confusion Diego! I see you were replying to Carlindo...Carlindo, to answer your question, this will depend on your specific objectives, but in general, any 12.8V LiFePO4 will do

That will certainly work, you'll get a whole lot of x6100 run time with 18Ah...The voltage is good (but make sure the charger is turned off in the radio to reduce heating).?But, depending on your

LifePo 18Ah/h [image0.jpeg] Saludos. Diego. EA1CN

*if you connect the mic through USB to a PC and use voicemeeter to direct it to the x6100 that should work. The x6100 has to be connected with its USB cable to the dev port*

DOnt think so V1.1.7 Release Note Image File SHA256: BF153B10AB3D942060E65BE35A64A2D6C419A5EFF8D941E5C8CE93CE6DD44305 APP: V1.1.7 Jul 26 2023,11:50:55 BASE: V1.1.6 Mar 7 2023,09:57:03 1. Add

So far neither USB nor BT is working. But in the plans.

so maybe with a BT headset with microphone? I understand a BT headshet speaker or a BT speaker. With microphone should also work, right?

The stock firmware does not allow this. In an alternative, this may appear along with a BT headset

Any chance x6100 works with SDR-Console?

Is possible to TX with a USB Microphone? Also work TX quaility with software? I believe x6100 is able to connect to PC? I just dont know if in this way. Any help?

Hello, Everytime when I shutdown the radio and power it up the next day I have to set the date and time. I think it's the backup battery. Anyone did already the replacement ? 73 - Rudi - ON7CL

What portable external battery have you been using to run the Xiegu x6100 at 10W? THX Carlindo Lago - CT7BDB

About FW1.1.7 & CAT Control This might work. On client PC which is running WFView after connecting to X6100, Enable RigCtl & set port 4533. In WSJT-X on the same PC, set Rig to Hamlib NET rigctl,

No TX power [SOLVED] For the benefit of all users, this how I fixed my X6100 which showed 100ALC no TX power. I was using the radio as normal on CW and the TX power became intermittent. Then gone in

Hi Scot Good news from my side I had no glue between the ldmos and the heatplate. Now it's time to have fun and experiment getting small radio when it works we full of surprise and fun. Thank

Hi Real, I have fixed the radio.!! I removed the FINAL and tested it in a jig. It was not faulty. There was a lot of sticky melted glue on the heatsink to the back of the FET. I cleaned with alcohol

Hi ua3mlu as you can contact xiegu Can you please ask them to put the cat back to how it was as it does not work with HAM RADIO DELUXE, old or new Versions, i have tested both and it does not work

Deleted space in the SSID and 6100 connected, thanks a million. Nick WB4SQI

Se escribe mucho sobre la PWR y el calor. Creo que todo es más sencillo. Para QRP (5w) VCC= 9 volts Para 10 W VCC= 10 volts Siempre No Charge. Mucha gente usa FT8 con excesiva potencia. Yo soy feliz