开云体育

Yes. Previous patched version (with increased FM modulation level) has 3x FM depth multiplier, comparing original firmware. This - 10x from original firmware. Let me know, if it too much) -- Georgy //

Hi Georgy! Thanks for this suggestions. I’ll check that and share my findings soon. 73 de Jarek SP9HGN W dniu niedz., 20 kwi 2025 o 10:31 Georgy Dyuldin via groups.io

Sorry but I am a bit confused (unfortunately easy for me. ?) Am I correct in thinking that the latest base release v1.1.6 R1 still includes the 160Hz low frequency filter, the compressor and FM

Nice! For the record, i use BASE 1.1.6 with APP 1.1.9 (and r1cbu / r2rfe firmware) without issue. As i’ve mentioned before 1.1.6 BASE has the best implementation of NR (noise reduction) vs other the

Hi, Jerry. 1.1.6 means, that it based on the OEM BASE firmware 1.1.6. It's not compatible with any another BASE version because it's a replacement - it just erase BASE firmware and flashes new one

Georgy, Is this Mod also compatible with the latest Xiego Base Firmware, 1.1.8? If not, what has changed from 1.1.6 to 1.1.8? So what do we lose by using 1.1.6 with your Mod instead of the latest

Hi. I do some more changes on 1.1.6 BASE firmware - fix AM transmit, add a soft limiter, output power control. I decide to track changes within github repo:

Hi. It's known issue (reported few days ago) - https://github.com/gdyuldin/x6100_gui/issues/150 It might be related with ft8 lib or with main application. FT8 might encode messages in a few ways. For

Hi! I'm writing to check if you've encountered a similar issue with the R1CBU/R2RFE firmware. I'm using the latest version, 0.29.2. During my recent trip to Crete, Greece, when I tried to use the FT8

Awesome. Thanks for testing it.

That worked - thanks.

Interesting. I’m attaching another styles_custom.txt with a small change. Can you test it for me and see if that fixes it for you? Thanks.

I love the colors but when working FT8, the SWR and ALC lines are superimposed on the waterfall.? Is there a way to change the settings so this does not happen?? I took off all the magnifcations in

I had the same issues and this solution worked for me too. The solution was recommended to me by Grok.

To restart the GUI without rebooting (while running the R1CBU / R2RFE firmware) requires just holding the little “lock” button down for a few seconds until you hear the relay click and then the

Thank you very much for the work you have done.? That is to all of the contributors. Can you clarify how you restart the GUI?? Is it just restarting the radio or do I need to do something else??

I was frustrated trying to use a USB-C to USB-C cable to connect from my laptop to the X-6100. There are a lot of current electronics where the manufacturers have not implemented the USB-C interface

I have two configurations. One, simplest, the second with most options. 1. Cable one USB Cable for the USB port on your computer to USB A MALE. The seconds is the OTG Cable with USB A female to Type

Paul, thanks for responding. What brand of OTG did you use and specifically what cable did you use to run from the adapter to the X6100? -- Mike NN3I

Try adding a On The Go (OTG) adapter in the output of your computer. You go from USB-C to USB-A on the OTG. Cured my X6100 interface problems. Paul F Beeman W2PB [email protected]> wrote: