开云体育

Great to hear , I was dreading it was going to be the same man that mods the G90 group, This X6100 group is great It is good that the threads stay open, Good luck, Thanks Dave. 2E0DMB wrote:

Thank you Michael ? wrote:

Thanks.? Was getting a little frustrated trying to get my brand new X6100 to play with WSJT-X but your setup photo got me straightened out. Was making contacts in minutes. Kudos. 73

Just in case anyone is wondering what became of Scott's request for a new moderator for this group. I agreed to take on the role and have been doing so quietly for the past couple of weeks. I have a

I don’t know of an alternate manual but there is a pretty good book specifically on the X6100 from the “Radio Today” series authored by Andrew Barron, ZL3DW. If I recall I purchased my copy from

There is a book available on Amazon, which I just happened to receive a copy of for Christmas but really haven't had much of a chance to delve into. It is called the Radio Today Guide to the Xiegu

Out of interest, does Base band V1.1.7 CAT work when used with R1CBU ? It does not work using the stock UI app...

When I bought mine, the guy at the shop recommended this book, and I thought it was a good start for me, completely new to radio. It's relatively up-to-date, but there are still small differences with

I'm use to using user manuals written for ICOM radios and find my included manual rather lacking.? Is there a user group manual that explains the radio more completely than the included one?

I got a usb-c to the Ethernet adapter. All is good

I have a problem with the Wi-Fi configuration. It does not allow me to change the private IP or gateway. I have 192.168.0.1 on my router but in the configuration it appears 192.168.3.21 and

I’m very happy with the Chameleon PRV Portable Resonant Vertical https://youtu.be/nsC3BFIPZNQ?feature=shared ( https://youtu.be/nsC3BFIPZNQ?feature=shared ) While it’s a little pricey. It’s well

I have built that antenna and it works better than I expected. Edit: The qrp guys vertical. Small lightweight, and pretty easy build.

Are you using it for FT8? What is your antenna? If you are using it for digital or cw, are you checking how hot the radio gets? Using a non resonant antenna like an EFHW can introduce common mode

Make sure your settings for XIT and RIT are zero.

I am a new user of the X6100, which I bought hoping to use as an IF rig for some microwave transverters I am building. I saw the reports of spurious signals and also observed them on my rig so I

I forgot to mention, with all those spurs running around in the radio, the main VFO will mix with them and generate birdies everywhere, which everyone has observed. I have not looked at the Tx

Great work and information Rainer! Thank you that is an amazing starting point. I haven't even had to open the radio Hi Hi Hmmm... wondering if a software approach is possible then... @Oleg what's the

Happy new year to all! I had the opportunity to measure the LO leakage on my X6100, production dateJuly, 2022. Here is what I found: - as expected, the leakage is frequency dependent: the worst case

In fact, if I remember correctly, Oleg has also implemented tuner memory support for multiple antennas. So each antenna has its own tuner memories. Cheers Michael VE3WMB