开云体育

After updating my 6100 to the latest firmware, I was having difficulty with setting up the radio for FT8 with WSJT-X 2.6.1. After trying different settings, I finally got the combination right and

I bought a portable fan on amazon. works great. Jerry ---- Extra Ham Radio Operator: WF5W Registered Linu=x User: 275424 3D CAD designer The most exciting phrase to hear in science - the one that

New radio case cooling on ebay https://www.ebay.co.uk/itm/145428759626

Cat is working well with 1.7 downloaded from xiegu site for me with wsjtx 2.6.1 and 2 7.rc2 either. The speed is 19200 8 bit no parity 1 bit stop. 73 from Vincenzo IU2RPO Inviato dal mio telefono

I just downloaded Firmware Upgrade 20230831 (fix CAT) When installed it shows APP : V.1.1.7 Aug 25 2023, 15:09:46 CAT is NOT working in WSJTX. Is it working for you? Any suggestions?

The problem has been fixed, it will be fine in the next version.

Audio leakage from internal speaker to the internal microphone? This path would be eliminated with either headset or external speaker. Greetings, Rainer DG1SMD

Successfully updated the X6100, thanks for the assist from the Group. Using an Apple Mini, MacOS, the Balena Etcher program works very smoothly and easy. Has to be "easy" for me when it comes to

Yes, I was able to reproduce. This happens at high volumes and only when outputting to the internal speaker. And when the headset is close to the speaker. If an external speaker is connected, then

Thanks for the questions. I turned the MONI down to 0 (zero), Screen is not off at the time this occurs, and it happens only when the voice announcement starts. chuck kd6aej

Is the monitor volume turned up? Just a thought.

Hello Chuck, I don't get that here. Providing you are referring to screen off mode? When does this happen, all the time or when the voice is speaking? You can hear my demo if you search for CQ Blind

I found that with the audio announcements there develops a feedback between the speaker and the microphone.? It is loud and high pitched, with no way to lower the volume. It stops when you unplug the

To date, I use the internal battery. ?5 watts and a 28.5 foot speaker wire antenna with counterpoise/ground went 1750 miles to Aruba. ?That’s good enough for me.

Hola. Yo no uso la batería del equipo. Está cargada siempre. Uso una LiFePo 18 A/h y antena KOMUNICA Pro-2 y EFHW en el campo. Sólo CW, no phone. Muy bien siempre. Saludos. Diego. EA1CN.

Thank you for the information. ?I greatly appreciate your clarification. I had not experienced it, because my unit came updated, and, more importantly, works—with the exception of the charging and

This is my experience as well... When not transmitting the standby current demand is well within the supplied charger capacity (1A )... I have mistakenly tried to perform an upgrade on internal

Is this something you experienced? I have used the provided charger to power the radio during updates without any issue. In fact, the only real reason there is instruction to use external power for

When purchasing a product, I expect the package to be complete. ?The X6100 is almost complete enough for my purposes: highly portable and self contained transceiver. ?I write “almost”, because

Hi Randy I had a bit of heatsink laying around, it is only small but it has helped a lot, The hole Transverter is heating up so it is conducting ok, when I got it, the 50ohm 50W did fail straight