On Tue, Aug 15, 2023 at 11:09 AM, <ruihamradio@...> wrote:
Is possible to TX with a USB Microphone???
The stock firmware does not allow this. In an alternative, this may appear along with a BT headset
|
Re: X6100 release of v1.17, adding support for wfview
Any chance x6100 works with SDR-Console?
|
Is possible to TX with a USB Microphone???
Also work TX quaility with software?
I believe x6100 is able to connect to PC? I just dont know if in this way.
Any help?
|
Xiegu X6100 Backup Battery
Hello,
Everytime when I shutdown the radio and power it up the next day I have to set the date and time.
I think it's the backup battery.
Anyone did already the replacement ?
73 - Rudi - ON7CL
|
Re: Power - Voltage too high ?
What portable external battery have you been using to run the Xiegu x6100 at 10W?
THX
Carlindo Lago - CT7BDB
|
Re: X6100 release of v1.17, adding support for wfview
About FW1.1.7 & CAT Control
This might work.
On client PC which is running WFView after connecting to X6100, Enable RigCtl & set port 4533.
In WSJT-X on the same PC, set Rig to Hamlib NET rigctl, Network server: localhost:4533
Audio set to PC¡¯s speaker & mic.
CAT Control works on my PC. I don¡¯t have good antenna to test so could someone test if WSJTX really works this way?
crazycats100
|
Re: ALC 100 and NO TX output (AFT5M31N) LDMOS [SOLVED]
No TX power [SOLVED]
For the benefit of all users, this how I fixed my X6100 which showed 100ALC no TX power. I was using the radio as normal on CW and the TX power became intermittent. Then gone in a few more seconds.
In this thread I have documented many tests, voltages and items that @Real and I discovered and other people helped us look at.?
Shortly after the failure, I noticed that switching the RX ATT on actually allowed the TX to work again (this was tried and worked several times .. odd!)?
After a few attempts the TX power failed and never came back.
I tried flashing and refreshing many firmware - nothing worked.?
Yesterday I removed the AFT final output FET transistor and it was obvious now that something was wrong. On my radio version there was some type of rubberised compound or gasket around the FET and heatsink. The heatsink PUSHES though the PCB onto the BACK of the FET. The Source of the FET is held against this heatsink which is also a connection to the PCB. The Drain and Gate are soldered directly (the two tabs on the FET).?
The gasket had clearly melted or the adhesive failed and lots of clear sticky substance had flooded under the FET between the heatsink.
The Source of the FET (back plate) was lumpy and sort of corroded really... I used alcohol and a small file to clean and dress both the FET and the heatsink to make a clean mating surface.?
Re soldered the FET back into the radio and it worked first time perfectly. The radio is remaining at a normal temperature and I have full TX power restored.?
I am now using FW 1.1.7 and that is working perfectly along with WFSERVER all working great.?
SO for my radio, the output was not broken. I tested the FET on a breadboard using a DDM meter by charging the gate with the diode mode and observing the drain src conduct. Touching the gate with my finger discharges the gate and current stops flowing.
Hope this helps
Scot
M0RWV?
|
Re: ALC 100 and NO TX output (AFT5M31N) LDMOS
Hi Scot
Good news from my side I had no glue between the ldmos and the heatplate.
Now it's time to have fun and experiment
getting small radio when it works we full of surprise and fun.
Thank
ve2cuz
Real
|
Re: ALC 100 and NO TX output (AFT5M31N) LDMOS
Hi Real, I have fixed the radio.!!
I removed the FINAL and tested it in a jig. It was not faulty. There was a lot of sticky melted glue on the heatsink to the back of the FET. I cleaned with alcohol and a file. I reseated the FINAL and toughened the heatsink. The radio is now perfect!.
Speak soon
73?
Scot
M0RWV
|
Re: X6100 release of v1.17, adding support for wfview
Hi ua3mlu
as you can contact xiegu
Can you please ask them to put the cat back to how it was as it does not work with HAM RADIO DELUXE, old or new Versions, i have tested both
and it does not work with Bluetooth android app Prxtx, That did work very well, Yes keep wfview,
Thanks Dave 2E0DMB
|
Deleted space in the SSID and 6100 connected, thanks a million.
Nick
WB4SQI
|
Re: Power - Voltage too high ?
Se escribe mucho sobre la PWR y el calor. Creo que todo es m¨¢s sencillo.
Para QRP (5w) VCC= 9 volts
Para 10 W VCC= 10 volts
Siempre No Charge.
Mucha gente usa FT8 con excesiva potencia. Yo soy feliz por usar s¨®lo CW.
Creo que se pretenden cosas del X6100 para las que, realmente, no est¨¢ preparado 100%.?
Mi uso es portable, CW y 5 w (rara vez con 10w (+3dB solo)?
Saludos. Diego. EA1CN
toggle quoted message
Show quoted text
El 14 ago 2023, a las 12:26, Geoff C via groups.io <geoff.clamp@...> escribi¨®:
?Thanks to all who have contributed.? I have a much better understanding of the issues involved here now.
Basically I will avoid using the KC33 and stick to a 12v PSU I also have (although the noise benefits of the KX33 will be missed).
I have certainly noticed high heat levels - particularly when using the high duty-cycle modes like FT4 and FT8.? I have a fan available which is keeping this under control.
Thanks again.
Geoff
G3YTX
--
TNX, Dido. EA1CN?
|
Re: X6100 release of v1.17, adding support for wfview
Even released versions have bugs.? If it works for you, great.? If not revert back.??
On Aug 13, 2023 4:39 PM, Lisa WO?L <lr7521061@...> wrote: I¡¯m not sure who¡¯s right on this point but I have been checking daily and the update still isn¡¯t posted on the Radiodity website.? This makes me wonder.? Keep in mind Xiegu¡¯s philosophy¡ we are their beta testers.? Whomever among us that jumps in right away will either enjoy the new features or run headlong into the new bugs¡ or both. I don't understand your reply. If the firmware is on the ziegu site it's recommended for downloading.
|
Re: X6100 release of v1.17, adding support for wfview
Hi i now have tested v1.17 with wsjtx and yes CAT does work with my radio but i did want to use it with Ham Radio Deluxe for pc ,and pocket rxtx for Android?
so if any new firmware updates come out, i suppose this new cat control will be the same
Dave?
|
Re: Power - Voltage too high ?
Thanks to all who have contributed.? I have a much better understanding of the issues involved here now.
Basically I will avoid using the KC33 and stick to a 12v PSU I also have (although the noise benefits of the KX33 will be missed).
I have certainly noticed high heat levels - particularly when using the high duty-cycle modes like FT4 and FT8.? I have a fan available which is keeping this under control.
Thanks again.
Geoff
G3YTX
|
Re: X6100 release of v1.17, adding support for wfview
Thanks?for your Information This is a big shame as I use ham radio deluxe, Is there any apps that will work on Android ? Thanks Dave?
On Mon, 14 Aug 2023, 09:57 ua3mlu, < ua3mlu@...> wrote: Today I received a response from Xiegu with a note to firmware 1.1.7
In order to be compatible with modern PC-side control software and improve communication efficiency, the CI-V communication protocol of APP V1.1.7 cancels ECHO, please be aware. In order to be compatible with modern PC-side control software and improve communication efficiency, CI-V The V communication protocol has canceled ECHO, please be informed.
It may no longer be compatible with the old version of Ham Radio Deluxe, please use FLRIG, WSJTX, JTDX and other PC-side control software.
|
Re: X6100 release of v1.17, adding support for wfview
Today I received a response from Xiegu with a note to firmware 1.1.7
In order to be compatible with modern PC-side control software and improve communication efficiency, the CI-V communication protocol of APP V1.1.7 cancels ECHO, please be aware. In order to be compatible with modern PC-side control software and improve communication efficiency, CI-V The V communication protocol has canceled ECHO, please be informed.
It may no longer be compatible with the old version of Ham Radio Deluxe, please use FLRIG, WSJTX, JTDX and other PC-side control software.
|
Re: X6100 release of v1.17, adding support for wfview
Are you using the new 1.17 firmware on a older x6100?
Just checking before I flash mine.
I need USB to work with cat for digital modes as well a WFview?
Thanks?
Chad
|
Re: X6100 release of v1.17, adding support for wfview
Tell your wfview software that you are using an IC-7100
On Sun, Aug 13, 2023 at 21:36 Georgina Joyce < gena@...> wrote: Hello,
Oh, I must have missed it. What is the IC-7000 trick?
73
> On 13 Aug 2023, at 22:03, Mark Knight <kd7dts@...> wrote:
>
> I've got an older X6100. Confirmed that I've got 100% WSJT-X functionality using the IC7000 trick. Also verified WFView access via WiFi. Nifty.
>
Georgina
***NOTE***
I am changing my email structure. Please change the held contact email address to: gena@...
Thank You!
Why not Join us via AllStar
Active Elements Bridge 56870
Blind Hams 506313 or via phone app 50617
Personal Radio Contact info:
Call: M0EBP
DMR ID: 2346259
Allstar: 52178 52340
Locater: IO83PS
|
Re: X6100 release of v1.17, adding support for wfview
Hello, Oh, I must have missed it. What is the IC-7000 trick? 73 On 13 Aug 2023, at 22:03, Mark Knight <kd7dts@...> wrote:
I've got an older X6100. Confirmed that I've got 100% WSJT-X functionality using the IC7000 trick. Also verified WFView access via WiFi. Nifty.
Georgina ***NOTE*** I am changing my email structure. Please change the held contact email address to: gena@... Thank You! Why not Join us via AllStar Active Elements Bridge 56870 Blind Hams 506313 or via phone app 50617 Personal Radio Contact info: Call: M0EBP DMR ID: 2346259 Allstar: 52178 52340 Locater: IO83PS
|
Carlindo Lago