开云体育

The stock firmware does not allow this. In an alternative, this may appear along with a BT headset

Any chance x6100 works with SDR-Console?

Is possible to TX with a USB Microphone? Also work TX quaility with software? I believe x6100 is able to connect to PC? I just dont know if in this way. Any help?

Hello, Everytime when I shutdown the radio and power it up the next day I have to set the date and time. I think it's the backup battery. Anyone did already the replacement ? 73 - Rudi - ON7CL

What portable external battery have you been using to run the Xiegu x6100 at 10W? THX Carlindo Lago - CT7BDB

About FW1.1.7 & CAT Control This might work. On client PC which is running WFView after connecting to X6100, Enable RigCtl & set port 4533. In WSJT-X on the same PC, set Rig to Hamlib NET rigctl,

No TX power [SOLVED] For the benefit of all users, this how I fixed my X6100 which showed 100ALC no TX power. I was using the radio as normal on CW and the TX power became intermittent. Then gone in

Hi Scot Good news from my side I had no glue between the ldmos and the heatplate. Now it's time to have fun and experiment getting small radio when it works we full of surprise and fun. Thank

Hi Real, I have fixed the radio.!! I removed the FINAL and tested it in a jig. It was not faulty. There was a lot of sticky melted glue on the heatsink to the back of the FET. I cleaned with alcohol

Hi ua3mlu as you can contact xiegu Can you please ask them to put the cat back to how it was as it does not work with HAM RADIO DELUXE, old or new Versions, i have tested both and it does not work

Deleted space in the SSID and 6100 connected, thanks a million. Nick WB4SQI

Se escribe mucho sobre la PWR y el calor. Creo que todo es más sencillo. Para QRP (5w) VCC= 9 volts Para 10 W VCC= 10 volts Siempre No Charge. Mucha gente usa FT8 con excesiva potencia. Yo soy feliz

Even released versions have bugs. If it works for you, great. If not revert back.

Hi i now have tested v1.17 with wsjtx and yes CAT does work with my radio but i did want to use it with Ham Radio Deluxe for pc ,and pocket rxtx for Android so if any new firmware updates come out, i

Thanks to all who have contributed.? I have a much better understanding of the issues involved here now. Basically I will avoid using the KC33 and stick to a 12v PSU I also have (although the noise

Thanks for your Information This is a big shame as I use ham radio deluxe, Is there any apps that will work on Android ? Thanks Dave

Today I received a response from Xiegu with a note to firmware 1.1.7 In order to be compatible with modern PC-side control software and improve communication efficiency, the CI-V communication

Are you using the new 1.17 firmware on a older x6100? Just checking before I flash mine. I need USB to work with cat for digital modes as well a WFview Thanks Chad

Tell your wfview software that you are using an IC-7100

Hello, Oh, I must have missed it. What is the IC-7000 trick? 73 Georgina ***NOTE*** I am changing my email structure. Please change the held contact email address to: gena@... Thank You! Why