开云体育

Oleg, I know this isn't your problem, but you're pretty smart guy so here is my question. I noticed that using the wlan dhcp, doesn't work.? It always populates 192.168.3.21, gateway 192.168.3.1 and

Oleg , the below described Ghost-Spike is complete away if the original FW of the X6100 will running and used. But I want not use the original FW . What can done Oleg for solve this problem ... ??? 73

Hi Oleg .... I have a question : I have on the screen of the X6100 always a Ghost-Spike exactly under the curser line , also to see in the waterfall. This spike is always present also without

Thank you!? I never tried long press on the frequency up/down... It works perfectly! Keep up the great work! Cheers, Jim W0CHL

Oleg, Thank you so much for the software - use it almost exclusively. Hoping you'll continue development.

Oleg, Yes, I'm talking theoretically because I'm still waiting for my radio to be delivered. I saw several videos in YouTube with the original firmware and your firmware version. None of them showed

I don't really understand what you are talking about. Have you tried my firmware? Do you have specific comments on it in terms of the waterfall, or are you talking theoretically? Very often I see in

The other option is to download the command set from https://xiegu.eu/downloads/ -- Gary Mitchelson NC3Z/4 Pamlico County, NC FM15 NC AHIMT COML

Oleg, To have a good working waterfall, you have to keep the min/max setting independent of the FFT to get good visibility. I do this every day with SDRconsole. Simon Brown knows very well to keep

I found it posted somewhere (manual or website?) that it is based on the IC-705commands, and sure enough it was. -- Gary Mitchelson NC3Z/4 Pamlico County, NC FM15 NC AHIMT COML

Apparently the question was about the details of using the buttons on the HMic. A short press on up/down changes the frequency with the selected step, a long press changes the bands. Short presses on

There is no "channels mode" in my solution. And there is no "band mode" as such. The transceiver is always in VFO mode. It's just that when you switch bands, you get to the saved frequency. Just like

Good night. Where could I find the cat commands for the Xiegu X6100. Thank you. 73s Ger, EC1A

I'm new to this software and maybe I've missed the obvious.? On the original software, I can use the? various frequency buttons on the mike to change bands.? On R1CBU software it stores memories.?

It is a normal USB keyboard. You can connect it directly to the transceiver. That's just native firmware very poorly uses an external keyboard. In my firmware, I can provide for setting the command to

Very clear, thanks. I was hoping that the streamdeck would send the CAT commands on its own... But that would need some more intelligence and a way to configure it for the proper set of CAT commands

Not really. The zoom in the spectrum is independent of the waterfall, but the settings for the min/max levels are general. This is logical.

You can also do stacked commands. As an example I have 1 button that performs the following steps I use to use the ATU in the XPA125B to tune: 1. Set RF Power to 5W 2. Key radio 3. provide me a

Short answers, Yes and Yes. -- Gary Mitchelson NC3Z/4 Pamlico County, NC FM15 NC AHIMT COML

Odd question about the streamdeck, do I need software installed on the pc? Could I program it on one computer then move it and use the shortcuts on another?