Hi,
?
I have made a new version of my mic design project.
The new version uses a MEMS (rather than electret) microphone element.
?
The design files for the circuit board are online here:
The design files for the enclosure are online here:
?
Overall I am happy with this new mic design.
I think it sounds better than the original X6100 mic and it is even smaller and lighter than my previous (electret) mic design.
?
73,
Scott ?KJ7NLA
?
|
That was quick, thank you.
|
CTCSS tones are not possible due to hardware limitations.
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
On Wed, Mar 26, 2025 at 03:02 AM, Jens/HB9JOI wrote:
Ooohhh YES , THANK YOU !!!
Awesome. Thanks for the suggestion and feedback.
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
?Hi All Yes this looks good? and very good that it clearly shows the bandwidth of the audio
toggle quoted message
Show quoted text
From: xiegu-x6100@groups.io <xiegu-x6100@groups.io> on behalf of Jens/HB9JOI via groups.io <hb9joi@...>
Sent: 26 March 2025 09:25
To: xiegu-x6100@groups.io <xiegu-x6100@groups.io>
Subject: Re: [xiegu-x6100] Color modified v0.29.2 x6100_gui and sdcard.img
?
?
x6100_marker-CW_ok
... very nice . Thank You.
?
?
From: wicknix via groups.io
Sent: Wednesday, March 26, 2025 3:14 AM
To: xiegu-x6100@groups.io
Subject: Re: [xiegu-x6100] Color modified v0.29.2 x6100_gui and sdcard.img
?
[Edited Message Follows]
[Reason: simple edit]
On Mon, Mar 24, 2025 at 12:48 PM, Jens/HB9JOI wrote:
I mean the CW SPECTRUM-SCOPE marker.
Is this more along the lines of what you are asking?
I tried to mimic the stock Xiegu firmware marker color as best i could.
?
?
New sdcard.img is uploaded if you want to try it.
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
?
x6100_marker-CW_ok
... very nice . Thank You.
?
toggle quoted message
Show quoted text
From: wicknix via groups.io
Sent: Wednesday, March 26, 2025 3:14 AM
To: xiegu-x6100@groups.io
Subject: Re: [xiegu-x6100] Color modified v0.29.2 x6100_gui and
sdcard.img
?
[Edited Message Follows]
[Reason: simple edit]
On Mon, Mar 24, 2025 at 12:48 PM, Jens/HB9JOI wrote:
I mean the CW SPECTRUM-SCOPE marker. Is this more along
the lines of what you are asking?
I tried to mimic the stock Xiegu firmware marker color as best i
could.
?
?
New sdcard.img is uploaded if you want to try it.
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
toggle quoted message
Show quoted text
From: Jens/HB9JOI via groups.io
Sent: Wednesday, March 26, 2025 9:02 AM
To: xiegu-x6100@groups.io
Subject: Re: [xiegu-x6100] Color modified v0.29.2 x6100_gui and
sdcard.img
?
Ooohhh YES , THANK YOU !!!
?
Image-download link ???
?
73 + 76 ! Jens / HB9JOI
?
?
?
From: wicknix via groups.io
Sent: Wednesday, March 26, 2025 3:14 AM
To: xiegu-x6100@groups.io
Subject: Re: [xiegu-x6100] Color modified v0.29.2 x6100_gui and
sdcard.img
?
[Edited Message Follows]
[Reason: simple edit]
On Mon, Mar 24, 2025 at 12:48 PM, Jens/HB9JOI wrote:
I mean the CW SPECTRUM-SCOPE marker. Is this more along
the lines of what you are asking?
I tried to mimic the stock Xiegu firmware marker color as best i
could.
?
?
New sdcard.img is uploaded if you want to try it.
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
Ooohhh YES , THANK YOU !!!
?
Image-download link ???
?
73 + 76 ! Jens / HB9JOI
?
?
toggle quoted message
Show quoted text
From: wicknix via groups.io
Sent: Wednesday, March 26, 2025 3:14 AM
To: xiegu-x6100@groups.io
Subject: Re: [xiegu-x6100] Color modified v0.29.2 x6100_gui and
sdcard.img
?
[Edited Message Follows]
[Reason: simple edit]
On Mon, Mar 24, 2025 at 12:48 PM, Jens/HB9JOI wrote:
I mean the CW SPECTRUM-SCOPE marker. Is this more along
the lines of what you are asking?
I tried to mimic the stock Xiegu firmware marker color as best i
could.
?
?
New sdcard.img is uploaded if you want to try it.
|
|
|
I am using version 0.29.2 (is this the latest one?) and I wonder if there is a setting to move the magnified frequency display out of the way when tuning.
Tuning on a CW signal is very difficult because the magnifying frequency display blocks the spectrum.
I didn't find it and if it has been already written I apologize.
?
73, AE7YD
?
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
On Mon, Mar 24, 2025 at 12:48 PM, Jens/HB9JOI wrote:
I mean the CW SPECTRUM-SCOPE marker.
Is this more along the lines of what you are asking?
I tried to mimic the stock Xiegu firmware marker color as best i could.
?
?
New sdcard.img is uploaded if you want to try it.
|
Re: New x6100 user - a few questions
GPS:
I use this one (Have 3 of them) : https://www.amazon.com/dp/B086ZK6R89?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
I don't recommend this: https://www.amazon.com/dp/B01HF0K5WA?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5
But YMMV.
|
Re: x6100 Com ports not seen on my PCs.
Thank you Tony.
I did order both and should receive it tomorrow.
Yvon? AE7YD
On 3/25/2025 9:12:56 AM, Tony KE1TLG via groups.io <webstea@...> wrote: Yvon,? here is what is working on my X6100 to Lenovo X1 Nano, both purchased on Amazon: - CableCreation USB C to USB A Cable 5FT, USB C to USB 3.1 USB 3.2 Gen2 10Gbps USB A to C Data Cable
- Syntech USB C to USB Adapter, 2 Pack USB C to USB3,USB Type C to USB,Thunderbolt 3 to USB Female Adapter OTG Cable
Let me know how the setup works for you. ? Tony KE1TLG ? ? From: xiegu-x6100@groups.io <xiegu-x6100@groups.io> On Behalf Of Yvon via groups.io
Sent: Monday, March 24, 2025 7:51 PM
To: xiegu-x6100@groups.io
Subject: Re: [xiegu-x6100] x6100 Com ports not seen on my PCs. ? I am ready to try everything. I tested all my cables with high speed devices but I am willing to order the same components you are using. Please be kind enough to give the link to the cables and adapters you use and works for you.
|
Re: x6100 Com ports not seen on my PCs.
Yvon,? here is what is working on my X6100 to Lenovo X1 Nano, both purchased on Amazon: - CableCreation USB C to USB A Cable 5FT, USB C to USB 3.1 USB 3.2 Gen2 10Gbps USB A to C Data Cable
- Syntech USB C to USB Adapter, 2 Pack USB C to USB3,USB Type C to USB,Thunderbolt 3 to USB Female Adapter OTG Cable
Let me know how the setup works for you. ? Tony KE1TLG ? ?
toggle quoted message
Show quoted text
From: xiegu-x6100@groups.io <xiegu-x6100@groups.io> On Behalf Of Yvon via groups.io
Sent: Monday, March 24, 2025 7:51 PM
To: xiegu-x6100@groups.io
Subject: Re: [xiegu-x6100] x6100 Com ports not seen on my PCs.? I am ready to try everything. I tested all my cables with high speed devices but I am willing to order the same components you are using. Please be kind enough to give the link to the cables and adapters you use and works for you.
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
Thanks Georgy. That looks like it could be it. I'll play around with it in the next few days and see what the results are.
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
Well, I'll be. Thanks for the quick reply!
|
Re: Color modified v0.29.2 x6100_gui and sdcard.img
On Mon, Mar 24, 2025 at 07:03 PM, wicknix wrote:
I like your idea of being able to change colors from a few presets, however that's above my coding knowledge. Anyway, good luck with the x6200 project!
?
Edit: I will gladly make a pull request for my changes if you'd like me to.
Thanks. My coding knowledge of C/C++ was a bit above 0, when I bought X6100 one year ago )).
?
Regarding CW freq marker on the scope - I guess, Jens mean filter marker. It's color defined . You can replace bg_color with any color value, like . Also, might be helpful to change blend mode using
rect_dsc.blend_mode = LV_BLEND_MODE_ADDITIVE
or another .
--
Georgy // R2RFE
|
Re: x6100 Com ports not seen on my PCs.
Yvon,
given you results with Linux, i.e. that nothing happens there either, I am 100% sure it is a hardware/cable problem.
If your X6100 is still under warranty, I would definitely contact the vendor to see what they think.
?
Franco
|
Re: x6100 Com ports not seen on my PCs.
Anthony,
?
I am ready to try everything. I tested all my cables with high speed devices but I am willing to order the same components you are using.
Please be kind enough to give the link to the cables and adapters you use and works for you.
?
Thank you.
?
73, Yvon
AE7YD
|
Re: x6100 Com ports not seen on my PCs.
Thank you Franco,
?
I didn't think about that.
I have other Linux computers but this is the results on a Raspberry Pi 5:
?
Bus 004 Device 002: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:c093 Logitech, Inc. M500s Optical Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 03f0:6941 HP, Inc HP Wired Keyboard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
?
and:
Mon Mar 24 15:54:55 2025] usb 3-2: new full-speed USB device number 2 using xhci-hcd
[Mon Mar 24 15:54:55 2025] usb 1-2: new low-speed USB device number 2 using xhci-hcd
[Mon Mar 24 15:54:56 2025] usb 3-2: New USB device found, idVendor=046d, idProduct=c093, bcdDevice=53.00
[Mon Mar 24 15:54:56 2025] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Mon Mar 24 15:54:56 2025] usb 3-2: Product: Advanced Corded Mouse M500s
[Mon Mar 24 15:54:56 2025] usb 3-2: Manufacturer: Logitech
[Mon Mar 24 15:54:56 2025] usb 3-2: SerialNumber: 2068324E4247
[Mon Mar 24 15:54:56 2025] usb 1-2: New USB device found, idVendor=03f0, idProduct=6941, bcdDevice= 1.01
[Mon Mar 24 15:54:56 2025] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Mon Mar 24 15:54:56 2025] usb 1-2: Product: HP Wired Keyboard
[Mon Mar 24 15:54:56 2025] usb 1-2: Manufacturer: SIGMACHIP
[Mon Mar 24 15:54:56 2025] input: Logitech Advanced Corded Mouse M500s as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:046D:C093.0001/input/input0
[Mon Mar 24 15:54:56 2025] hid-generic 0003:046D:C093.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Advanced Corded Mouse M500s] on usb-xhci-hcd.1-2/input0
[Mon Mar 24 15:54:56 2025] input: Logitech Advanced Corded Mouse M500s Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C093.0002/input/input1
[Mon Mar 24 15:54:56 2025] input: SIGMACHIP HP Wired Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:03F0:6941.0003/input/input4
[Mon Mar 24 15:54:56 2025] hid-generic 0003:046D:C093.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech Advanced Corded Mouse M500s] on usb-xhci-hcd.1-2/input1
[Mon Mar 24 15:54:56 2025] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[Mon Mar 24 15:54:56 2025] usb 4-1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[Mon Mar 24 15:54:56 2025] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Mon Mar 24 15:54:56 2025] usb 4-1: Product: Flash Drive
[Mon Mar 24 15:54:56 2025] usb 4-1: Manufacturer: Samsung
[Mon Mar 24 15:54:56 2025] usb 4-1: SerialNumber: 0342017060006448
[Mon Mar 24 15:54:56 2025] usb-storage 4-1:1.0: USB Mass Storage device detected
?
And just like my Windows PC nothing happens when I plug the cable in. I did compare the results of both commands
with and without the 6100 plugged in and see no difference.
|
Scott Baker
wicknix
Jens/HB9JOI