Re: X6100 release of v1.17, adding support for wfview
Even released versions have bugs.? If it works for you, great.? If not revert back.??
On Aug 13, 2023 4:39 PM, Lisa WO?L <lr7521061@...> wrote: I¡¯m not sure who¡¯s right on this point but I have been checking daily and the update still isn¡¯t posted on the Radiodity website.? This makes me wonder.? Keep in mind Xiegu¡¯s philosophy¡ we are their beta testers.? Whomever among us that jumps in right away will either enjoy the new features or run headlong into the new bugs¡ or both. I don't understand your reply. If the firmware is on the ziegu site it's recommended for downloading.
|
Re: X6100 release of v1.17, adding support for wfview
Hi i now have tested v1.17 with wsjtx and yes CAT does work with my radio but i did want to use it with Ham Radio Deluxe for pc ,and pocket rxtx for Android?
so if any new firmware updates come out, i suppose this new cat control will be the same
Dave?
|
Re: Power - Voltage too high ?
Thanks to all who have contributed.? I have a much better understanding of the issues involved here now.
Basically I will avoid using the KC33 and stick to a 12v PSU I also have (although the noise benefits of the KX33 will be missed).
I have certainly noticed high heat levels - particularly when using the high duty-cycle modes like FT4 and FT8.? I have a fan available which is keeping this under control.
Thanks again.
Geoff
G3YTX
|
Re: X6100 release of v1.17, adding support for wfview
Thanks?for your Information This is a big shame as I use ham radio deluxe, Is there any apps that will work on Android ? Thanks Dave?
On Mon, 14 Aug 2023, 09:57 ua3mlu, < ua3mlu@...> wrote: Today I received a response from Xiegu with a note to firmware 1.1.7
In order to be compatible with modern PC-side control software and improve communication efficiency, the CI-V communication protocol of APP V1.1.7 cancels ECHO, please be aware. In order to be compatible with modern PC-side control software and improve communication efficiency, CI-V The V communication protocol has canceled ECHO, please be informed.
It may no longer be compatible with the old version of Ham Radio Deluxe, please use FLRIG, WSJTX, JTDX and other PC-side control software.
|
Re: X6100 release of v1.17, adding support for wfview
Today I received a response from Xiegu with a note to firmware 1.1.7
In order to be compatible with modern PC-side control software and improve communication efficiency, the CI-V communication protocol of APP V1.1.7 cancels ECHO, please be aware. In order to be compatible with modern PC-side control software and improve communication efficiency, CI-V The V communication protocol has canceled ECHO, please be informed.
It may no longer be compatible with the old version of Ham Radio Deluxe, please use FLRIG, WSJTX, JTDX and other PC-side control software.
|
Re: X6100 release of v1.17, adding support for wfview
Are you using the new 1.17 firmware on a older x6100?
Just checking before I flash mine.
I need USB to work with cat for digital modes as well a WFview?
Thanks?
Chad
|
Re: X6100 release of v1.17, adding support for wfview
Tell your wfview software that you are using an IC-7100
On Sun, Aug 13, 2023 at 21:36 Georgina Joyce < gena@...> wrote: Hello,
Oh, I must have missed it. What is the IC-7000 trick?
73
> On 13 Aug 2023, at 22:03, Mark Knight <kd7dts@...> wrote:
>
> I've got an older X6100. Confirmed that I've got 100% WSJT-X functionality using the IC7000 trick. Also verified WFView access via WiFi. Nifty.
>
Georgina
***NOTE***
I am changing my email structure. Please change the held contact email address to: gena@...
Thank You!
Why not Join us via AllStar
Active Elements Bridge 56870
Blind Hams 506313 or via phone app 50617
Personal Radio Contact info:
Call: M0EBP
DMR ID: 2346259
Allstar: 52178 52340
Locater: IO83PS
|
Re: X6100 release of v1.17, adding support for wfview
Hello, Oh, I must have missed it. What is the IC-7000 trick? 73 On 13 Aug 2023, at 22:03, Mark Knight <kd7dts@...> wrote:
I've got an older X6100. Confirmed that I've got 100% WSJT-X functionality using the IC7000 trick. Also verified WFView access via WiFi. Nifty.
Georgina ***NOTE*** I am changing my email structure. Please change the held contact email address to: gena@... Thank You! Why not Join us via AllStar Active Elements Bridge 56870 Blind Hams 506313 or via phone app 50617 Personal Radio Contact info: Call: M0EBP DMR ID: 2346259 Allstar: 52178 52340 Locater: IO83PS
|
Re: X6100 release of v1.17, adding support for wfview
I've got an older X6100. Confirmed that I've got 100% WSJT-X functionality using the IC7000 trick. Also verified WFView access via WiFi. Nifty.
|
Re: X6100 release of v1.17, adding support for wfview
I¡¯m not sure who¡¯s right on this point but I have been checking daily and the update still isn¡¯t posted on the Radiodity website.? This makes me wonder.? Keep in mind Xiegu¡¯s philosophy¡ we are their beta testers.? Whomever among us that jumps in right away will either enjoy the new features or run headlong into the new bugs¡ or both.
I don't understand your reply. If the firmware is on the ziegu site it's recommended for downloading.
|
Re: X6100 release of v1.17, adding support for wfview
I don't understand your reply. If the firmware is on the ziegu site it's recommended for downloading.
|
Re: X6100 release of v1.17, adding support for wfview
Hi!
I dont see anywhere that this firmware is recommended for flashing. So mines ahead, and its your own explosion when its happening.
Dont blame ziegu here.
73 marco
------- Original Message -------
Dave via groups.io <dvfuller@...> schrieb am Sonntag, 13. August 2023 um 20:38:
I have a 3-month-old model and when I flashed to 1.7 my cat control no longer worked with ft8 on wsjtx. I kept getting rig connection errors. Reflashed to 1.6 and radio & cat is back to normal. Boy ziegu really came out with a loser firmware this time.
|
Re: ALC 100 and NO TX output (AFT5M31N) LDMOS
Ok thanks, Like I said My radio is over a year old, I use ham radio deluxe set to ic7000, and Prxtx with android phone and tablet working with v1.16 but not v1.17 I hope they have a fix soon as I do like the look of wfview, Thanks Dave?
On Sun, 13 Aug 2023, 19:32 Real Drouin, < ve2cuz@...> wrote: Hi
When i connect the x6100 on my pc i use ic7000 for cat control (WSJTX) it work great
When i run WSJTX?on board armbian i use Flrig (transceiver Xiegu-5105) and WSJTX?(Flrig Flrig).
Thank ve2cuz Real
Hi Real, When you tested the cat control on your radio, Was this using a phone/tablet or a PC, Thanks Dave?
On Sun, 13 Aug 2023, 19:07 Real Drouin, < ve2cuz@...> wrote: Hi Scot
i share photo armbian linux running onboard x6100 with js8call wsjtx etc.....
the answer of your question is on the photo.
Thank?
Real
ve2cuz
|
Re: X6100 release of v1.17, adding support for wfview
I have a 3-month-old model and when I flashed to 1.7 my cat control no longer worked with ft8 on wsjtx. I kept getting rig connection errors. Reflashed to 1.6 and radio & cat is back to normal. Boy ziegu really came out with a loser firmware this time.
|
Re: ALC 100 and NO TX output (AFT5M31N) LDMOS
Hi
When i connect the x6100 on my pc i use ic7000 for cat control (WSJTX) it work great
When i run WSJTX?on board armbian i use Flrig (transceiver Xiegu-5105) and WSJTX?(Flrig Flrig).
Thank ve2cuz Real
Hi Real, When you tested the cat control on your radio, Was this using a phone/tablet or a PC, Thanks Dave?
On Sun, 13 Aug 2023, 19:07 Real Drouin, < ve2cuz@...> wrote: Hi Scot
i share photo armbian linux running onboard x6100 with js8call wsjtx etc.....
the answer of your question is on the photo.
Thank?
Real
ve2cuz
|
Re: ALC 100 and NO TX output (AFT5M31N) LDMOS
Hi Real, When you tested the cat control on your radio, Was this using a phone/tablet or a PC, Thanks Dave?
On Sun, 13 Aug 2023, 19:07 Real Drouin, < ve2cuz@...> wrote: Hi Scot
i share photo armbian linux running onboard x6100 with js8call wsjtx etc.....
the answer of your question is on the photo.
Thank?
Real
ve2cuz
|
Re: ALC 100 and NO TX output (AFT5M31N) LDMOS
Hi Scot
i share photo armbian linux running onboard x6100 with js8call wsjtx etc.....
the answer of your question is on the photo.
Thank?
Real
ve2cuz
|
Re: ALC 100 and NO TX output (AFT5M31N) LDMOS
Hi Real, please can you confirm the exact APP & BASE Firmware versions, and date?? This is mine... 
|
Re: X6100 release of v1.17, adding support for wfview
Hi Real This is great news for you, It does seem that newer models seem to have working cat control, With v1.17,mine is over one?year old, Dave
On Sun, 13 Aug 2023, 02:09 Real Drouin, < ve2cuz@...> wrote: Hi Dave
I buy my radio on marketplace for only 350$ can
and the manufacturing date is 2023.03
when i buy the radio have big issue , no tx power and the alc is alway at 100
i flashe multip version firmware noting change no tx power
i replaced the final transistor and nothing change?
i waiting for new release of firmware
i flash the new version 1.1.7 thank god now my rig working very well.
thank
Real
ve2cuz
|
Re: X6100 release of v1.17, adding support for wfview
Hi Dave
I buy my radio on marketplace for only 350$ can
and the manufacturing date is 2023.03
when i buy the radio have big issue , no tx power and the alc is alway at 100
i flashe multip version firmware noting change no tx power
i replaced the final transistor and nothing change?
i waiting for new release of firmware
i flash the new version 1.1.7 thank god now my rig working very well.
thank
Real
ve2cuz
|
Dave
