开云体育

Hi. This release contains not so much changes on the UI part. Most of the changes is related with a patched BASE firmware. I added some controls and adaptive notch filter, comparing rev 2. UI might be

My first thought: not a software issue but an internally disconnected BNC. If you TX? in a dummy load (in NFM or CW): is there a normal power output and normal SWR? -- Robert

I’m looking for some advice. The last time I used my much loved X6100 it worked perfectly (v1.1.7). The unit is three years old. It sat for about a month during a move and when I fired it up there

Would love to. But is too expensive from San Salvador to attend.RobYS1RS

There may be a short circuit to ground at the receiver input before the bandpass filter. When ATT is enabled, there is a resistance across the short circuit to ground, so to speak, and reception is

Thanks for your help. After installing a 1k ohm resistor and replacing the missing components, everything is working fine.

Hi Greg, Thanks for all the great work!!

I'm in the middle of a fairly large city, and the BCI filter is essential. Of course you can say goodbye to 160 meters. For me though, the reception problem was a combo of BCI and the BASE app. With

I guess, it might be due to overloading radio input with a strong AM stations. You can try to use a BCI filter. For example - this /g/xiegu-x6100/topic/k9dp_qrp_bci_filter/102162571

I'm working on the GUI part. Hope will publish both (GUI and patched BASE) in a few days. -- Georgy // R2RFE

Yes, Rainer — ATT (!) has to be ON (!) If PRE preamplifier is on, then I don’t hear any signals (!!!!!!) 73, Randy K7RAN

Hello, thanks for your thoughts. It was just the solder joints that came loose — the socket is intact. What had me worried was that resistor. Now I’ll try it with a 1k ohm and see how it goes.

… apologies, I forgot to post the link :/ 3.5 mm Audio Jack Connector PCB Mount Female Socket 6 Pin PJ-311D/PJ-342B 5pcs ebay.us

I did exactly the same to mine but didn’t manage to break the resistor but I did manage to break the socket and some of the track. If you need a replacement the eBay link below is an almost exact

Thank you for your help! It’s not an exact match, but I’ll try using a slightly larger 1 kΩ SMD resistor and see how it goes. ?

My device ist currently open. I measured 1 kohm. Am 10. Mai 2025 01:46:58 MESZ schrieb "mega.teknik48 via groups.io" <mega.teknik48@...>:

Mean you ATT or PRE? Am 10. Mai 2025 07:56:25 MESZ schrieb "Randy K7RAN via groups.io" <k7ran@...>:

Ok, maybe this is an epidemic! I didn't have problems before, and I don't think I've ever changed the app or base... My *APP is 1.1.8* — and my *BASE is 1.1.7*... *And suddenly my receive is almost

I was wondering if anyone else in this group will be at the Dayton Hamvention next week. If anyone is interested, we could get together to talk all things X6100 for half an hour Friday or Saturday -

I accidentally dropped the device while an external speaker was connected, and the speaker jack broke. Along with the jack, a capacitor and what I believe is an SMD resistor behind it also got