开云体育

I'm always surprised to see that so many radio hams still use Windows, surely not the best OS for technical matters that we OMs deal with. OMicalement, Michel de F5UJA

Worked well using Linux Mint. Windows wants to format the card since one of the partitions is unreadable. A good reason to keep a Linux machine around, even if you normally use Windows.

There are two most common FAT partitions on the SD card. It's a surprise to me that Windows can't handle this!

From reading this, I assume you need a Linux OS to install the patch. Is this correct?

Thank you Oleg for your response. It is very clear. 73 Rob YS1RS Sent from my iPad.

When installing the patch, the params.db settings file is reinstalled. This is necessary to add 6m band for FT8/FT4

OK, the Micro SD is not formatted for Windows. You use your Windows computer together with a tool called Balena Etcher only to image the SD card, but the format in the card is not Windows. At least,

The SD card has 3 partitions: Boot, DATA, rootfs. Y ou need the partition where the params.db file is already located

Sorry, an update here! My son just reminded me that YES, it had the CW TX TONE all the time. The red led was ON and was transmitting continuously. The small Dummy Load was starting to get warm when I

I had a similar situation. In my case it was not a tone. The radio went on transmit (TX) and stood there. Nothing worked. Software Reset didn’t solve it. Nothing. Had to open the back and

Oleg, There is only the volume folder and the root directory.? Where is the data folder?? I've pulled the microsd and put it into my windows system. I placed the .tgz file in the root directory. on

I just had something weird happen.? I was on 10 meters just listening.? I had the Xiegu Speaker plugged in.? I left and returned and the radio was producing this tone.? I could tune up and down.?

Have you got "Monitor" turned up?

Hi Oleg thank you for all your work. Simon G8HAM

Fixed: * Callsign and QTH dialogs * Added band 6m for FT8/FT4 * Changed low freq to 500kHz How install: Copy the file (

The firmware does not support switching keyboard layouts. Those. it is always in English mode. Those. You can use any with English layout.

Oleg, I plan to purchase a mini keyboard for my X6100, complete with USB C connector and built-in hub. Since different languages use different keyboard layouts (in DE z and y are swapped, we got

Thanks for getting back to me. Looks like your suggestions are right on! Now to get back out there!!! Thank-you, 73’s Paul VE3WM gena@...> wrote:

Hello, Well I only know from the using the spoken prompts but you should be able to see that the audio encoder menu system has mic gain for internal and external. They are fighting each other. Turn

I must be missing something and could use some advice. I have had my Xiegu 6100 for over a year. When I am out with my radio and try to have a QSO, I have terrible feedback between my speaker