开云体育

Thanks for getting back to me. Looks like your suggestions are right on! Now to get back out there!!! Thank-you, 73’s Paul VE3WM gena@...> wrote:

Hello, Well I only know from the using the spoken prompts but you should be able to see that the audio encoder menu system has mic gain for internal and external. They are fighting each other. Turn

I must be missing something and could use some advice. I have had my Xiegu 6100 for over a year. When I am out with my radio and try to have a QSO, I have terrible feedback between my speaker

I did some testing on 'dummy load' and find power out changes as FT8 frequency is increased. If I adjust FT8 cursor to transmit with 500 Hz or 800 Hz tone my X6100 transmits FT8 CQ at 5 watts. (As

It's quite strange. When you turn on APP FT8, if the current power is more than 5W, a warning should appear that the power has been reduced to 5W. I checked this and this is exactly how it works for

Thank you for your great firmware. I do not have FT8 running on external computer. Only connection to X6100 are 12.6 V external power supply, CW straight key and dipole antenna. Rig power set in

Thanks Oleg, I'll try again maybe im doing something wrong. The popular wifi mini keyboard I use with built in mouse pad does not seem to work so maybe I'll buy a different one and try again. It works

Hello, чт, 14 мар. 2024 г., 16:42 <wa3see@...>: The power in my firmware is limited only by transmission FT8 by means of the x6100 itself. If you are using an external computer this

Any suggestions how I can lower the TX power out when running FT8 with R1CBU ver 0.2.0 firmware. Release notes mention FT8/FT4 power limited to 5 Watts...but my X6100 is putting out 10 watts

Yesterday my first contact with my new X6100 was XE1XR with 10 watts. I was a 5x4. I just installed R1CBU's firmware v.20.0. Getting used to it. I didn't realize it would now transmit on CB. The

пт, 8 мар. 2024 г., 23:20 scot forshaw <scot.forshaw@...>: And all this is already included there. I use a wireless USB Logitech keyboard. 73! >

Hi Oleg, is it possible to add some driver to the SD card to support USB wireless keyboard? As the FT8 only works with external keyboard, I tried the one I normally use (a wifi type mini keyboard

Thanks for clarification. I'll give further tries then.

There is always crypto currency like Litecoin

чт, 7 мар. 2024 г., 16:15 F5UJA @ Free <f5uja@...>: It does not imply an answer. The operator can immediately start working with another correspondent. This firmware sends RR73 if it was

чт, 7 мар. 2024 г., 19:28 Miniwatt Network <bamteste@...>: In the current situation, I am not able to accept donations from abroad. 73!

Thank you Oleg for the hard work and outstanding achievements, you are like the best spirit of hams that contributed to keep the activity live and fresh suggestion: perhaps creating a crowd funding

Oleg, Thanks for all your time and efforts you put into the software. We could experience what can be done with decent coding on a mediocre radio. Sadly, this had to be done by the manufacturer and

Hi Daniel, I also have tried to use FT8CN along with the X6100 without success. Whereas the CAT works, drives the rig, freq changes aso, the audio cannot seems to use either BT or USB. I can hear

Unfortunately, I have no experience with FT8 using Oleg’s software on the X6100. I use the Android app FT8CN on my old Samsung Galaxy smartphone and have been very happy with it. However, it only