Re: R1CBU firmware 0.23.0 Download Source
¿ªÔÆÌåÓý?
At first You have to download the 0.20.1 full image here :
?
Then create with Your image with Balena-Etcher or RUFUS on Your SD-Card
.
?
After finishing REMOVE the SD-Card and INSERT it AGAIN !
Open Your ¡° PC ¡°-Table and You will see TWO Folders : BOOT ansd DATA
.
?
Download the .tgz (0.23.0) here :
Save it and remember where You had stored it ... hi
?
Open the DATA folder with double click .
Open a second table window ¡° PC ¡° and search there for Your downloaded
0.23.0.tgz file .
This 0.23.0.tgz only marked it with 1? left click and with
rigth mouse ...
COPY ONLY into the DATA folder (drag and paste)
?
Close all , remove Your SD-Card , put it in Your X6100 , start it and wait
...
X6100 will start and shows on the start-screen FW 0.23.0-rc0 .
?
That`s all ...
?
73 & 76 / Jens ¨C HB9JOI
?
?
? From: GW4DVB
Sent: Thursday, August 22, 2024 3:15 PM
Subject: Re: [xiegu-x6100] R1CBU firmware 0.23.0 Download
Source ?
Thank you ¨C How do I download the 0.23.0 image please ? ? From:
[email protected] <[email protected]> On Behalf Of
Jens ? The 0.23.tgz file is not for to create the image? !!! ? From: Jens Sent: Thursday, August 22, 2024 3:03 PM Subject: Re: [xiegu-x6100] R1CBU firmware 0.23.0 Download Source ? ? The 0.23.tgz fils not for to create the image? !!! This file must only copied into the Data-Folder of Your existing image !!! ? 73 , Jens / HB9JOI ? +++ ? ? ? From: GW4DVB Sent: Thursday, August 22, 2024 2:47 PM Subject: Re: [xiegu-x6100] R1CBU firmware 0.23.0 Download Source ? I haven¡¯t got that far.. It¡¯s as the point in Balena when I select the downloaded firmware. It doesn¡¯t seem to see it as an image file! ? From:
[email protected] <[email protected]> On Behalf
Of Jens ? ? ... seems Your sd-card is corrupt . ? 73 ,Jens /HB9JOI ? +++ ? ? From: GW4DVB Sent: Thursday, August 22, 2024 2:05 PM Subject: Re: [xiegu-x6100] R1CBU firmware 0.23.0 Download Source ? When trying to program to SD card via Balena it is saying ¡°Missing Partition Table¡± ? From:
[email protected] <[email protected]> On Behalf
Of Janos Barabas ? Hi, ? You can find the 0.23 update here: /g/xiegu-x6100/message/5662 ? 73, Janos ON4JBS |
Jens/HB9JOI