I have been fighting with the X6100 for some time now trying to figure out why the rig will miss the last dah on occasion.; for example the number 4 or a letter V omits the last character.
At times this is fluid other times it may happen as many as three times in a row and then it works a few times and then may only do it one time. VERY frustrating.
Well, this morning I was using my old Kenwood TS450s with my MFJ keyer paddle so I decided to try it on the X6100. I set the keyer mode in the rig to manual and I let the MFJ do the work.
That solved the problem. Now CW is fluid!
I guess I have one of the few rigs with this problem because I have not seen other complaints about this problem.
This proves there is a glitch in the internal keyer. I have upgraded to the latest X6100 firmware and R1CBU firmware and it does not solve the problem.
I am now very happy with the rig!
73 Paul KE4SC
