Hi Group,
I think I've figured out how the Rx and Tx frequencies are stored in the code plug.? So far I've only tested with the low band code plug that was posted earlier.
--- snip ---
skip@Dell-7040:~/xcat/xcat_ng_fw/research$ ./cp_dump.py -f 10M6MTST.RDT
dumping 10M6MTST.RDT
EEPROM length 2048, checksum 0x5c6e
Checksum is valid
SB9600 address 0x01
32 modes:
Mode table has 24 bytes entries
Radio range 29.7 - 50.0 Mhz
Mode 1:
frx 29.6
ftx 29.6
?
Mode 2:
frx 52.525
ftx 52.525
?
Mode 3:
frx 52.525
ftx 52.525
?
Mode 4:
frx 29.6
ftx 29.6
--- snip ---
The script is here:??if you'd like to give it a test.
Things are looking up...
73's Skip WB6YMH
