Re: Has anyone fully decoded the X9000 memory mapping?
|
OK so the CSV could be helpful but it's similar to the episode?of Halt and Catch Fire where they dump the entire BIOS chip using LEDs writing each bit on a notepad. No thanks. I exported a .dsl file and it does open up in the software and display what I was seeing so I'm going to attach that instead. It's a 20 second 1 MHz per channel read using a 2.5 volt trigger threshold voltage and instant mode and streaming mode. Radio is a lowband?unit.?
I just finished rebuilding my adapter thingy for EEPROM sniffing and have all the lines labeled. It was giving a fail 84 and it turns out that if anything is wrong as in being plugged in wrong or what not the?EEPROM is easily corrupted, probably the WE being engaged when it shouldn't. It seems to be solid now.
?I'm using a 2k chip so the extra 4 pins are not utilized (24 pin part). Already seeing some interesting things if my connections are correct. It appears it's hitting up the EEPROM every 4.6 milliseconds to grab some data but not all that much data, like 13 or 15 bursts of one bit width of data then it recycles but the patterns are not exactly the same. Write enable does go active quite often as well which is interesting but from what I'm seeing just in looking briefly just now it's not simultaneous to CE of the EEPROM so perhaps it's writing something else....dunno...strange.?
I'm still learning DSView since everything I do involves me doing a cannonbal?into the deepest end then flailing around learning the tools and methods simultaneously. I will try to push out a file here in a bit and anyone should be able to grab DSView since it's free and view it.?
What speed and file size should I use? I am using the DSLogic U3Pro32. Right now I'm just looking at 1 second at 1 Mhz with it sitting on a channel not scanning and zero options enabled, not even PL. I think it's RX 30.000, TX 31.000 TA freq 32.000.?
LOL I just did a 1 Mhz 20 second read and exported to CSV. It created a 1 Gb Excel file. Damn!
On Sat, Aug 6, 2022 at 7:50 AM Skip Hansen < skip@...> wrote: Wow, that screen looks familiar!? But I've never seen so many traces.? I missed the message where you said you were going with the DreamSource box. Now I want to write a disassembler for the 6301, squirrel, hell it's a tree full of them!
Please upload your capture when you get a chance!
73's Skip p.s. That was FAST for a DreamSource ... can I ask where you got it??
On Fri, Aug 5, 2022 at 9:09 PM Casey Crane < ccrane148@...> wrote: Yikes... full live 1 second read zoomed in with one of the channels being chip select. I still need to figure out how to organize and label the channel names (surely I can do that like in Saleae Logic's stuff. Off to RTFM. At least it seems to be working.
|
