开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

 

Don, the repeater will either come back with its call sent in CW or it will come back with a strong non-audible signal that will peg your S-meter.? Based on what you have described it sounds like a radio setting, especially if you are able to hit other repeaters (I believe you mentioned that you could).? At 45' you shouldn't have any trouble.? Brian D, do you have any other advice?

Harry
KF2TV

-----------------------------------------

From: "Don Vallone (KD2REU) via groups.io"
To: [email protected]
Cc: "rkarz@..."
Sent: Friday May 8 2020 4:36:19PM
Subject: Re: [xarc] Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

Quick question...Can you confirm my assumption that this repeater will return a tone if it catches my transmission? This way I can test without someone else actually being on the repeater. I’m assuming this is the case with all repeaters but not sure.

I’m using an ICOM 9700 and a dual band collinear base station antenna on the roof about 45 feet in the air. My next step is to actually download a programming file using software - looking into the RT Systems software. Maybe there’s a setting that’s eluding me. I’ve tried using the iCOM programming software but it requires you to manually input all of the data to a table anyway (or at least find a CSV file that’s already in the correct format, which I don’t have). There are amazing support groups on Facebook that are filling the void until this social distancing thing ends.

Don
KD2REU?

On May 8, 2020, at 3:56 PM, Don Vallone (KD2REU) via groups.io <indyshadow@...> wrote:

?
Thanks, guys. I appreciate that! I’ll let you know how my troubleshooting goes. It’s a brand new radio and I’m sure I’m missing some simple step. ?

On May 8, 2020, at 9:39 AM, hwillia1@... wrote:

?Don, Bob Karz and I live just up/down the road from you.? I/we would be happy to come over with some test equipment to diagnose what the problem is.? I run 10-15 watts to a disconne antenna up in my attic and hit the repeater without any problem.? In addition, I have a dual band vertical base antenna that I would be happy to let you try and use on a long term basis.

Harry
KF2TV

-----------------------------------------

From: "Don Vallone (KD2REU) via groups.io"
To: [email protected]
Cc:
Sent: Thursday May 7 2020 8:44:56PM
Subject: Re: [xarc] Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

I also tried again tonight to check in to the net but could not be heard. I have a new rig and can't seem to hit the Canadice repeater even though I can hit the Bristol repeater loud and clear. I could hear everyone just fine and off the scale. I double checked the duplex (-) and tone (110.9) but just not hitting that repeater! I even cranked it up to 100 watts and boosted the mic gain, but the repeater is just not getting my signal and letting me in no matter what I do. Maybe there is a special magic handshake that I'm not doing?? Oh well....See you all on Zoom.

Don
KD2REU


On Thursday, May 7, 2020, 08:11:48 PM EDT, Rodger " Burky" Burkhart <rodger@...> wrote:


First time trying to connect to this repeater from here in Greece with my HT. I could hear some of the guys barely but so much noise I could not understand you guys so I did not try to sign in. Next time maybe I will hook up to a J pole and try it. Or sit in my car and try my mobile.

On Thu, May 7, 2020, 12:00 [email protected] Calendar <[email protected]> wrote:

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Re: Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

 

开云体育

Don,

On FM, if you activate the repeater when you press the Push-to-talk button on your mic, you should hear the repeater transmit for about 3/4 of a second after you let go of the PTT button.? It is just a squelch-tail. ?? There is no audible tone on our repeater.

With that antenna at 45 feet, the repeater should have no problem hearing you.? And since you say you hear it just fine, I'd say your antenna is fine.? I would guess your Tone Squelch/PL tone is not setup correctly.? I know you said you double-checked, but I know it can be tricky getting the right settings saved to a memory channel.? So I would look closely at that.? Yes, you need a 110.9 Hz sub-audible tone on your transmit signal on 144.69Mhz.

As Harry said, any one of us can certainly lend a hand if you continue to have issues getting in.

Brian



On 5/8/2020 4:36 PM, Don Vallone (KD2REU) via groups.io wrote:

Quick question...Can you confirm my assumption that this repeater will return a tone if it catches my transmission? This way I can test without someone else actually being on the repeater. I’m assuming this is the case with all repeaters but not sure.

I’m using an ICOM 9700 and a dual band collinear base station antenna on the roof about 45 feet in the air. My next step is to actually download a programming file using software - looking into the RT Systems software. Maybe there’s a setting that’s eluding me. I’ve tried using the iCOM programming software but it requires you to manually input all of the data to a table anyway (or at least find a CSV file that’s already in the correct format, which I don’t have). There are amazing support groups on Facebook that are filling the void until this social distancing thing ends.

Don
KD2REU?

On May 8, 2020, at 3:56 PM, Don Vallone (KD2REU) via groups.io <indyshadow@...> wrote:

?
Thanks, guys. I appreciate that! I’ll let you know how my troubleshooting goes. It’s a brand new radio and I’m sure I’m missing some simple step. ?

On May 8, 2020, at 9:39 AM, hwillia1@... wrote:

?Don, Bob Karz and I live just up/down the road from you.? I/we would be happy to come over with some test equipment to diagnose what the problem is.? I run 10-15 watts to a disconne antenna up in my attic and hit the repeater without any problem.? In addition, I have a dual band vertical base antenna that I would be happy to let you try and use on a long term basis.

Harry
KF2TV

-----------------------------------------

From: "Don Vallone (KD2REU) via groups.io"
To: [email protected]
Cc:
Sent: Thursday May 7 2020 8:44:56PM
Subject: Re: [xarc] Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

I also tried again tonight to check in to the net but could not be heard. I have a new rig and can't seem to hit the Canadice repeater even though I can hit the Bristol repeater loud and clear. I could hear everyone just fine and off the scale. I double checked the duplex (-) and tone (110.9) but just not hitting that repeater! I even cranked it up to 100 watts and boosted the mic gain, but the repeater is just not getting my signal and letting me in no matter what I do. Maybe there is a special magic handshake that I'm not doing?? Oh well....See you all on Zoom.

Don
KD2REU


On Thursday, May 7, 2020, 08:11:48 PM EDT, Rodger " Burky" Burkhart <rodger@...> wrote:


First time trying to connect to this repeater from here in Greece with my HT. I could hear some of the guys barely but so much noise I could not understand you guys so I did not try to sign in. Next time maybe I will hook up to a J pole and try it. Or sit in my car and try my mobile.

On Thu, May 7, 2020, 12:00 [email protected] Calendar <[email protected]> wrote:

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.



Re: Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

Kramer
 

开云体育

Hi Don,

?

Something seems strange. I can bring up the club repeater with my 5W handheld sitting at my first floor dinner table. I’m in Webster near Hegedorn’s.

?

Bests,

Dusty

?

From: [email protected] <[email protected]> On Behalf Of Don Vallone (KD2REU) via groups.io
Sent: Friday, May 8, 2020 4:36 PM
To: [email protected]
Cc: rkarz@...
Subject: Re: [xarc] Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

?

Quick question...Can you confirm my assumption that this repeater will return a tone if it catches my transmission? This way I can test without someone else actually being on the repeater. I’m assuming this is the case with all repeaters but not sure.

?

I’m using an ICOM 9700 and a dual band collinear base station antenna on the roof about 45 feet in the air. My next step is to actually download a programming file using software - looking into the RT Systems software. Maybe there’s a setting that’s eluding me. I’ve tried using the iCOM programming software but it requires you to manually input all of the data to a table anyway (or at least find a CSV file that’s already in the correct format, which I don’t have). There are amazing support groups on Facebook that are filling the void until this social distancing thing ends.

?

Don

KD2REU?



On May 8, 2020, at 3:56 PM, Don Vallone (KD2REU) via groups.io <indyshadow@...> wrote:

?

Thanks, guys. I appreciate that! I’ll let you know how my troubleshooting goes. It’s a brand new radio and I’m sure I’m missing some simple step. ?



On May 8, 2020, at 9:39 AM, hwillia1@... wrote:

?Don, Bob Karz and I live just up/down the road from you.? I/we would be happy to come over with some test equipment to diagnose what the problem is.? I run 10-15 watts to a disconne antenna up in my attic and hit the repeater without any problem.? In addition, I have a dual band vertical base antenna that I would be happy to let you try and use on a long term basis.

?

Harry

KF2TV

-----------------------------------------

From: "Don Vallone (KD2REU) via groups.io"
To: [email protected]
Cc:
Sent: Thursday May 7 2020 8:44:56PM
Subject: Re: [xarc] Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

I also tried again tonight to check in to the net but could not be heard. I have a new rig and can't seem to hit the Canadice repeater even though I can hit the Bristol repeater loud and clear. I could hear everyone just fine and off the scale. I double checked the duplex (-) and tone (110.9) but just not hitting that repeater! I even cranked it up to 100 watts and boosted the mic gain, but the repeater is just not getting my signal and letting me in no matter what I do. Maybe there is a special magic handshake that I'm not doing?? Oh well....See you all on Zoom.

?

Don

KD2REU

?

?

On Thursday, May 7, 2020, 08:11:48 PM EDT, Rodger " Burky" Burkhart <rodger@...> wrote:

?

?

First time trying to connect to this repeater from here in Greece with my HT. I could hear some of the guys barely but so much noise I could not understand you guys so I did not try to sign in. Next time maybe I will hook up to a J pole and try it. Or sit in my car and try my mobile.

?

On Thu, May 7, 2020, 12:00 [email protected] Calendar <[email protected]> wrote:

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Virus-free.


Re: Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

 

开云体育

Quick question...Can you confirm my assumption that this repeater will return a tone if it catches my transmission? This way I can test without someone else actually being on the repeater. I’m assuming this is the case with all repeaters but not sure.

I’m using an ICOM 9700 and a dual band collinear base station antenna on the roof about 45 feet in the air. My next step is to actually download a programming file using software - looking into the RT Systems software. Maybe there’s a setting that’s eluding me. I’ve tried using the iCOM programming software but it requires you to manually input all of the data to a table anyway (or at least find a CSV file that’s already in the correct format, which I don’t have). There are amazing support groups on Facebook that are filling the void until this social distancing thing ends.

Don
KD2REU?

On May 8, 2020, at 3:56 PM, Don Vallone (KD2REU) via groups.io <indyshadow@...> wrote:

?
Thanks, guys. I appreciate that! I’ll let you know how my troubleshooting goes. It’s a brand new radio and I’m sure I’m missing some simple step. ?

On May 8, 2020, at 9:39 AM, hwillia1@... wrote:

?Don, Bob Karz and I live just up/down the road from you.? I/we would be happy to come over with some test equipment to diagnose what the problem is.? I run 10-15 watts to a disconne antenna up in my attic and hit the repeater without any problem.? In addition, I have a dual band vertical base antenna that I would be happy to let you try and use on a long term basis.

Harry
KF2TV

-----------------------------------------

From: "Don Vallone (KD2REU) via groups.io"
To: [email protected]
Cc:
Sent: Thursday May 7 2020 8:44:56PM
Subject: Re: [xarc] Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

I also tried again tonight to check in to the net but could not be heard. I have a new rig and can't seem to hit the Canadice repeater even though I can hit the Bristol repeater loud and clear. I could hear everyone just fine and off the scale. I double checked the duplex (-) and tone (110.9) but just not hitting that repeater! I even cranked it up to 100 watts and boosted the mic gain, but the repeater is just not getting my signal and letting me in no matter what I do. Maybe there is a special magic handshake that I'm not doing?? Oh well....See you all on Zoom.

Don
KD2REU


On Thursday, May 7, 2020, 08:11:48 PM EDT, Rodger " Burky" Burkhart <rodger@...> wrote:


First time trying to connect to this repeater from here in Greece with my HT. I could hear some of the guys barely but so much noise I could not understand you guys so I did not try to sign in. Next time maybe I will hook up to a J pole and try it. Or sit in my car and try my mobile.

On Thu, May 7, 2020, 12:00 [email protected] Calendar <[email protected]> wrote:

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Re: Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

 

开云体育

Thanks, guys. I appreciate that! I’ll let you know how my troubleshooting goes. It’s a brand new radio and I’m sure I’m missing some simple step. ?

On May 8, 2020, at 9:39 AM, hwillia1@... wrote:

?Don, Bob Karz and I live just up/down the road from you.? I/we would be happy to come over with some test equipment to diagnose what the problem is.? I run 10-15 watts to a disconne antenna up in my attic and hit the repeater without any problem.? In addition, I have a dual band vertical base antenna that I would be happy to let you try and use on a long term basis.

Harry
KF2TV

-----------------------------------------

From: "Don Vallone (KD2REU) via groups.io"
To: [email protected]
Cc:
Sent: Thursday May 7 2020 8:44:56PM
Subject: Re: [xarc] Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

I also tried again tonight to check in to the net but could not be heard. I have a new rig and can't seem to hit the Canadice repeater even though I can hit the Bristol repeater loud and clear. I could hear everyone just fine and off the scale. I double checked the duplex (-) and tone (110.9) but just not hitting that repeater! I even cranked it up to 100 watts and boosted the mic gain, but the repeater is just not getting my signal and letting me in no matter what I do. Maybe there is a special magic handshake that I'm not doing?? Oh well....See you all on Zoom.

Don
KD2REU


On Thursday, May 7, 2020, 08:11:48 PM EDT, Rodger " Burky" Burkhart <rodger@...> wrote:


First time trying to connect to this repeater from here in Greece with my HT. I could hear some of the guys barely but so much noise I could not understand you guys so I did not try to sign in. Next time maybe I will hook up to a J pole and try it. Or sit in my car and try my mobile.

On Thu, May 7, 2020, 12:00 [email protected] Calendar <[email protected]> wrote:

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Re: Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

 

Don, Bob Karz and I live just up/down the road from you.? I/we would be happy to come over with some test equipment to diagnose what the problem is.? I run 10-15 watts to a disconne antenna up in my attic and hit the repeater without any problem.? In addition, I have a dual band vertical base antenna that I would be happy to let you try and use on a long term basis.

Harry
KF2TV

-----------------------------------------

From: "Don Vallone (KD2REU) via groups.io"
To: [email protected]
Cc:
Sent: Thursday May 7 2020 8:44:56PM
Subject: Re: [xarc] Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

I also tried again tonight to check in to the net but could not be heard. I have a new rig and can't seem to hit the Canadice repeater even though I can hit the Bristol repeater loud and clear. I could hear everyone just fine and off the scale. I double checked the duplex (-) and tone (110.9) but just not hitting that repeater! I even cranked it up to 100 watts and boosted the mic gain, but the repeater is just not getting my signal and letting me in no matter what I do. Maybe there is a special magic handshake that I'm not doing?? Oh well....See you all on Zoom.

Don
KD2REU


On Thursday, May 7, 2020, 08:11:48 PM EDT, Rodger " Burky" Burkhart <rodger@...> wrote:


First time trying to connect to this repeater from here in Greece with my HT. I could hear some of the guys barely but so much noise I could not understand you guys so I did not try to sign in. Next time maybe I will hook up to a J pole and try it. Or sit in my car and try my mobile.


On Thu, May 7, 2020, 12:00 [email protected] Calendar <[email protected]> wrote:

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Re: Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

 

I also tried again tonight to check in to the net but could not be heard. I have a new rig and can't seem to hit the Canadice repeater even though I can hit the Bristol repeater loud and clear. I could hear everyone just fine and off the scale. I double checked the duplex (-) and tone (110.9) but just not hitting that repeater! I even cranked it up to 100 watts and boosted the mic gain, but the repeater is just not getting my signal and letting me in no matter what I do. Maybe there is a special magic handshake that I'm not doing?? Oh well....See you all on Zoom.

Don
KD2REU


On Thursday, May 7, 2020, 08:11:48 PM EDT, Rodger " Burky" Burkhart <rodger@...> wrote:


First time trying to connect to this repeater from here in Greece with my HT. I could hear some of the guys barely but so much noise I could not understand you guys so I did not try to sign in. Next time maybe I will hook up to a J pole and try it. Or sit in my car and try my mobile.


On Thu, May 7, 2020, 12:00 [email protected] Calendar <[email protected]> wrote:

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Re: Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

Rodger " Burky" Burkhart
 

First time trying to connect to this repeater from here in Greece with my HT. I could hear some of the guys barely but so much noise I could not understand you guys so I did not try to sign in. Next time maybe I will hook up to a J pole and try it. Or sit in my car and try my mobile.


On Thu, May 7, 2020, 12:00 [email protected] Calendar <[email protected]> wrote:

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Upcoming Event: XARC 2 Meter Net - Thu, 05/07/2020 8:00pm-9:00pm #cal-reminder

 

Reminder: XARC 2 Meter Net

When: Thursday, 7 May 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Invitation

 

开云体育

FYI from Roch VHF Group


-------- Forwarded Message --------
Subject: Invitation
Date: Wed, 6 May 2020 04:21:40 +0000 (UTC)
From: Ev Tupis <w2ev@...>
To: k2zr.nfr@... <k2zr.nfr@...>, reallard5276@... <reallard5276@...>, k2as@... <k2as@...>, tillfam180@... <tillfam180@...>, kb2nci@... <kb2nci@...>


The VHF Group is sponsoring another Saturday Session and would like to invite you and your club members to attend!

Would you mind forwarding this information to your club membership or email group?

Yours in the hobby,
Ev Tupis, W2EV

-----------------------------------------------------------------------

When: THIS Saturday, May 9, 2020 10:00 AM Eastern Time (US and Canada)

Session Topic: Making Miles w/Meteors

There is no need to "catch a falling star", when all you need is its' (ionized) tail!

Long time meteor maven, Dana Shtun (VE3DS) will take attendees on a fascinating and enlightening journey through the history and development of meteor-trail based VHF communication, concluding with a demonstration of modern systems and techniques that allow even modest stations to communicate over long distances on VHF frequencies.

All are invited, but only 100 can attend.? Don't miss this opportunity.? Register right away and attend on Saturday.

---=== Register in advance for this meeting ===---



After registering, you will receive a confirmation email containing information about joining the meeting.
.


Upcoming Event: XARC 2 Meter Net - Thu, 04/30/2020 8:00pm-9:00pm #cal-reminder

 

Reminder: XARC 2 Meter Net

When: Thursday, 30 April 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


May Meeting (Virtual)

 

开云体育

Hi all,

We had a successful Board Meeting using Zoom earlier tonight, and we decided to go ahead and schedule our May general meeting as a virtual meeting.? The meeting date will be the usual 2nd Thursday (May 14), but instead of our 6PM start time, we will start at 8PM, and it will be online (NOT AT WEBSTER REC).

We will be using Zoom, and the meeting invitation is below.? I am fairly certain you can get to the meeting using the link below, but you may have better results by downloading the app if you are using a smart phone.? You can also get an app for the PC, which it may prompt you to optionally download.

You should be able to get audio via phone or PC.? A good USB headset with a mike is a plus on a PC.

One topic will be plans for Field Day.? As of this moment, it is still on as far as I know.? We will likely need to develop some additional plans/procedures this year.

We hope to have a few virtual shack tours during the meeting.? I'm sure there will be a few bugs, but if we hope things will go fairly smooth.

Details how to access the meeting are below:

----------------------------------------------------------------------------------------------------------------------------

Brian Donovan is inviting you to a scheduled Zoom meeting.

Topic: XARC May General Meeting
Time: May 14, 2020 08:00 PM Eastern Time (US and Canada)

Join Zoom Meeting
https://us04web.zoom.us/j/71133685165?pwd=aTQxMDI2SHQ2Vk12aHBhQUJLV0FtUT09

Meeting ID: 711 3368 5165
Password: 3FzrqH


-------------------------------------------------------------------------------------------------------------------------------

-- Brian K2AS
--------------------------------------------------------------------------------
k2as@...




Invitation: Spring Session On-line

 

FYI - from Roch VHF Group


..............................................................................................

The hamfests may have been cancelled, but the Rochester VHF Group () is pleased to announce a topic-based "Spring Session" for Saturday, April 25 at 10:00 AM to be held on-line.? VHF-bound Technician?? New-to-VHF-fun General, Advanced or Extra?

Please join us!? It's only a week away!? MARK YOUR CALENDARS TODAY!

EVERYONE is invited, but only the first 100 will get to enjoy them.? Yes, "them", plural.? TWO (related) topics!

-------------------------------------------------------------------------------

10:00 - DEMONSTRATION (thanks, Dave Carlson, N2OA):

"A Tour and Demonstration of the Icom IC-9700"

This is a multi-mode VHF/UHF Transceiver with 2 meters, 70 cm, and 23 cm in one radio!? Satellites?? Yes.? Terrestrial DX and contesting?? Yes.? Repeaters? Yes.? An easy way to get on some of the more populated "action VHF bands"? Yes!

Unlike YouTube videos, this is a LIVE session with the ability to Q&A!

..............................................................................................

WORKSHOP (thanks, Bill Rogers, K2TER):

"Stacking the Icom IC-9700 with 222 MHz and 902 MHz"

Bill will walk us through a more technical presentation showing a very creative transverter approach to make this exciting transceiver even more interesting by adding two more bands to it.

And yes...this session will be open for Q&A, too!

-------------------------------------------------------------------------------

Topic: RVHFG Spring Session ONLINE!

Time: Apr 25, 2020 10:00 AM Eastern Time (US and Canada)

Join Zoom Meeting



Meeting ID: 898 2926 2932

Password: 342610

One tap mobile

+19292056099,,89829262932#,,#,342610# US (New York)

+13126266799,,89829262932#,,#,342610# US (Chicago)

Dial by your location

??????? +1 929 205 6099 US (New York)

??????? +1 312 626 6799 US (Chicago)

??????? +1 253 215 8782 US

??????? +1 301 715 8592 US

??????? +1 346 248 7799 US (Houston)

??????? +1 669 900 6833 US (San Jose)

Meeting ID: 898 2926 2932

Password: 342610

Find your local number:
.


K2H Special Event Station Honoring the Heroes Fighting Covid-19

 


The K2H special event is still looking for stations to represent Monroe, Orleans and Wayne counties. If anyone is interested in representing those or other counties they can send an email to k2hheroes@...

?
?
Thanks

Dave
N2OA


We are trying to involve as many NY Hams as we can. We have the call K2H from May 1st until May 31st.

?

I am sending a one pager, that became 2! Plus the Certificate of Appreciation that can be downloaded and a sample of the K2H/SUF certificate.

?

The link to NYQSO has been added to the K2H QRZ Page to list counties.

?

Here is the Newsline story that released this morning. We are the third story, 3 minutes in.

?

We want to involve as many hams in NY State that want to operate, so anything you can do to spread the word will be appreciated.

?

To register to operate just email name, call and county to k2hheroes@...

?

Thanks for your help

?

Lou – NO2C

?


Upcoming Event: XARC 2 Meter Net - Thu, 04/23/2020 8:00pm-9:00pm #cal-reminder

 

Reminder: XARC 2 Meter Net

When: Thursday, 23 April 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


Upcoming Event: XARC 2 Meter Net - Thu, 04/16/2020 8:00pm-9:00pm #cal-reminder

 

Reminder: XARC 2 Meter Net

When: Thursday, 16 April 2020, 8:00pm to 9:00pm, (GMT-04:00) America/New York

Where:W2XRX Repeater 145.29 Mhz

View Event

Organizer: XARC k2as@...

Description: The XARC 2 Meter net is every Thursday at 8PM (except meeting nights - 2nd Thursday of month).? 145.29 Mhz W2XRX repeater.


FlexRadio Presentation at 7:30 pm tonight

 

For anyone interested, Mike Walker from Flex Radio is doing a presentation on their radios tonight.

As a follow up to my email last week, here are the details for my FlexRadio presentation.? For current Flex customers, some of this isn't really new stuff, but it might fill in some?gaps.

You will need to install the RingCentral meeting client and it is pretty painless.??

Topic: Michael Walker's RingCentral Meeting

Time: Apr 16, 2020 7:30 PM Eastern Time (US and Canada)

Join from PC, Mac, Linux, iOS or Android:?


? ? Password: FlexRadio

Or iPhone one-tap :

? ? ? ? ? ?+1(647)4944053,,1496581927# Toronto, ON

Or Telephone:

? ? Dial(for higher quality, dial a number based on your current location):

? ? ? ? ? ?+1(647)4944053 Toronto, ON

? ? Meeting ID: 149 658 1927



Dave
N2OA


Foxhunt Cancelled/Postponed

 

开云体育

Based on the current situation, the XARC Spring Fox Hunt is cancelled/postponed.

We will try again in the future, hopefully in the fall.

-- Brian
--------------------------------------------------------------------------------
k2as@...




Fusion Webinar

 

From the Yaesu FusionGroup:

ANNOUNCEMENT – Webinar – Saturday April 11th, 2020 11am Eastern or 11am Pacific

As part of the Yaesu Education System(YES) Network Yaesu USA will be offering a webinar dealing with thetopic of: Group Monitor (GM), Fusion Text Messaging, and Fusion Picture Messaging.
Two webinars will be held with one starting at 11am Eastern time and the second 11 am Pacific time.
While these webinars are recorded during these webinars attendees will have a chance to ask questions.
Registration is required and can be done by following the web link below.
Please only sign-up for onewebinar in order to make sure enough room exists for all that want to attend. Registration is limited to the first 100 people per webinar.The links for the webinars are as follows (you might have to cut and paste into your web browser):

Saturday April 11th, 2020 at 11 amEastern –

Saturday April 11th, 2020 at 11 amPacific – >?


Dave
N2OA


No Meeting at Webster Rec This Month

 

开云体育

Not a surprise I'm sure, but to make it official, there will be no meeting at Webster Rec this Thursday April 9.? Webster Rec is actually closed, and they have cancelled all reservations of meeting rooms for the first half of the month.

I am tempted to try a web meeting, but I think we would need more time to prepare.? So we will have our usual Thursday night net on the repeater instead.? Hope to hear you there.

-- Brian
--------------------------------------------------------------------------------
k2as@...