开云体育

Am Fr., 7. Apr. 2023 um 07:36 Uhr schrieb Mantas Mikul?nas < grawity@...>: Thank you for setting that up! I could successfully connect to 14704100 after I had tweaked my configuration.

Thanks for getting back, folks. I'll be poking around again tomorrow, would be nice to get a connection up from my virtual Cisco 7200. Getting the VAX online will take a little longer. Cheers, Hans

Hello Hans, I've had my X.25 router at th1cc.net shut down for a while, but I'll probably have time to put it back on the net this weekend. Meghan

I finally decided to add mine, just a pile of old Cisco routers to poke around (though at the moment I'm not sure if the telebahn x.25 profile is set up right, as so far I've been only playing with

Hi Hans, My system is listed but I no longer have the node turned on. I guess there just isn’t quite the critical mass yet. John Sent: Thursday, April 6, 2023 2:28 AM To:

Hi, laforge kindly referred me to this list as we chatted about my interest in X.25.? To get started, I have set up a virtual Cisco router using dynamips and configured it for xot according to the

I've found out that the line-processing on the router can make things difficult, to say the least.? I've been experimenting with the options to avoid the router line buffering which can cause

Nice! Can I ask for details and / or pictures when convenient? You know, computer / router / network pr0n and living vicariously through others. }:-) -- Grant. . . . unix || die

Thanks all - that helps. In this particular case it is probably worth the drive, as it's going to be more than one router given to me and it will only cost some Donato's pizza.? Depending on what

What I've been doing in lieu of getting more async lines is creating virtual lines with autocommand telnet. Like this: line vty 6 rotary 66 autocommand telnet <hostname or ip address> no exec

Hi Fred. As usual, it depends on what you want to do. The Cisco 1841 has separate AUX and CONSOLE ports so you can have a single X.25 “host” at your end. It also has 2 WIC slots so you

Hi all, Other than a Cisco 2800 series router, is there a list of routers (software dependent of course) that would make good candidates for usage on telebahn?? I have a line on some 1841's (free

Thanks David ! John Sent: Sunday, July 3, 2022 2:22 AM To: [email protected] Subject: Re: [X.25] Cisco 2620 as PAD for a modem bank This is what it has currently grown to. The menu 'tpcnet' is

This is what it has currently grown to. The menu 'tpcnet' is what is presented to dial-up modem clients, so there is no menu text, just an @ prompt, as you would get from the likes of

Howdy y'all: I was browsing some SGI documentation, and I was flabbergasted to see SGI had an X.25 product. I may be a bit biased because I'm an SGI fanboy, but I really like their documentation.

Sometimes, it is necessary to issue the command clear line XXX to get it back to order. I added some session timeouts to address this. John Sent: Saturday, July 2, 2022 8:59 PM To:

I was still able to connect just now without changing anything else on my side. The secret sauce I found for bouncing connections to other hosts based on incoming connections is this: ! line vty 60

And I just checked and the device David was connecting to on my side was still set at 10 so that may be why he needed to change his side to 10 also. I guess it is NOT a negotiated parameter.

Would you mind sharing your menu configuration section, obscuring anything that should be obscured? Thanks! John Sent: Friday, July 1, 2022 11:29 PM To: [email protected] Subject: [X.25] Cisco

Evan Stewart and I ran into that window size issue a few days ago and then I thought it went away. I’ve been using a bunch of different IOS images on different platforms so that may be part of