Re: JJ 2611 config WAS: RE: [X.25] Cisco 2620 as PAD for a modem bank
|
And I just checked and the device David was connecting to on my side was still set at 10 so that may be why he needed to change his side to 10 also.?? I guess it is NOT a negotiated parameter. ? I’ll change my win and wout back to 15 to see if that works for David. ? John ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of john jones via groups.io Sent: Saturday, July 2, 2022 7:00 PM To: [email protected]Subject: Re: JJ 2611 config WAS: RE: [X.25] Cisco 2620 as PAD for a modem bank ? Evan Stewart and I ran into that window size issue a few days ago and then I thought it went away. ? I’ve been using a bunch of different IOS images on different platforms so that may be part of it but perhaps simply lower the window size is an easy enough fix. ? John ? ? I had to add the following lines to get any pad connections to go through on the 2620:
x25 profile TELEBAHN dxe ?x25 facility windowsize 10 10 ?x25 facility packetsize 1024 1024 ?x25 subscribe packetsize permit 32 1024 target 512 1024 ?x25 subscribe windowsize permit 1 16 target 2 10
with those lines applied I was finally able to connect to JJ's and I also managed to get an inbound PAD to VTYs setup
-DK
|
