All,
Trying to get my Cisco 2600 working. ?I put in some X.25 routing rules as:
x25 routing
x25 route 752 xot 24.22.130.236 (my Cisco does not understand x25 route ... dns)?
x25 route 242 xot 216.239.32.21
If I then do:
x28
call 75241001
It sends packets but gets no response. ?I see in Packet capture:
14:51:24.542896 IP 104.58.86.73.11021 > 24.22.130.236.1998: Flags [S], seq 599537706, win 4128, options [mss 536], length 0
14:51:26.541877 IP 104.58.86.73.11021 > 24.22.130.236.1998: Flags [S], seq 599537706, win 4128, options [mss 536], length 0
DNS notes:
?Lab-Router(config)#x25 route (...)(...).. xot ?
? A.B.C.D ?Address of remote XOT host
However reversing the logic gives me:
Non-authoritative answer:
410.752.x25.org canonical name = 5fc5.ddns.net.
Name: 5fc5.ddns.net
Address: 24.22.130.236
So I assume I am right and its trying to connect, but per the notes this might be down. ?I will try to get a gateway external accessible once I have figured out how to make X.25 work in RSX11M.
