Yaesu FT-818, SCU-17 and flrig 2.0.05 on Win 10

Oliver von Sehlen All Messages By This Member #38111 Hi all, ? Just a little quirk I noticed (and which caused me quite some cursing and despair): When the FT-818 is in WFM mode (say, used as an ordinary FM radio receiver for your favourite FM broadcast station) and you try to connect it to flrig, the program crashes when trying to initialize the radio. ? Workaround: Simply switch the transceiver out of the WFM band (say, to any of the normal Ham radio bands, Shortwave or 2m/70cm) before trying to connect to flrig. ? Thought you might want to know before running into the same issue. ? 73, Oliver (DL1OVS)
K2JJK All Messages By This Member #38112 I think the issue is the sound card does not have a wide enough bandwidth. j toggle quoted message Show quoted text On Thu, Mar 27, 2025 at 12:50?AM Oliver von Sehlen via <ollijopp=[email protected]> wrote: Hi all, ? Just a little quirk I noticed (and which caused me quite some cursing and despair): When the FT-818 is in WFM mode (say, used as an ordinary FM radio receiver for your favourite FM broadcast station) and you try to connect it to flrig, the program crashes when trying to initialize the radio. ? Workaround: Simply switch the transceiver out of the WFM band (say, to any of the normal Ham radio bands, Shortwave or 2m/70cm) before trying to connect to flrig. ? Thought you might want to know before running into the same issue. ? 73, Oliver (DL1OVS)

开云体育