开云体育

TS-2000 Kenwood problem, PLEASE HELP

Herr K #37268 Hello everybody! I'm struggling with my TS2000 along with a SignaLink SL-1+ to work with FLDIGI. First of all: I'm using this setup succesfully for a long time now with WSJT-X. My notebook is connected via USB to the TS2000 and via 3,5mm Headphone-Jack to the SignaLink. The SignaLink is connected to the TS2000 via the 13-ACC-Connector. ? Now to FLDigi: In order to make the connection between the TS2000 and my notebook I'm using FLRig. So far so good. This is my problem: My notebook (FLDigi) is hearing the signals but only through the microphone of my notebook. If I turn down the volume of the TS2000 no signals are being decoded.... Sending is about the same problem: If I hit the tune-button of FLDigi the TS2000 switches to transmit but the SignaLink doesn't switch to "PTT" and the TS2000 expects audio from the microphon.... I've tried so many settings but all in vain.... It's driving me nuts. Does anyone have a solution how to setup TS2000 along with the SignaLink SL-1+ to work with FLDigi? PLEASE HELP! ? VY73 de Ben (DL4DBM)
K5EIS - Tom All Messages By This Member #37269 Look in the messages history of this group for message #33584 which has a useful description for a configuration like yours.
gqwradio All Messages By This Member #37270 开云体育 Ben: Ensure that in the FLrig set up, PTT by CAT is NOT selected. PTT by CAT takes precedence over any other PTT selections and CAT PTT will cause the 2000 to use mic and spkr for audio instead of audio to/from the 13 pin AUX connector. I hope that fixes your problem! 73 de Bob?? VE3YX On 2024-10-13 07:20, Herr K wrote: toggle quoted message Show quoted text Hello everybody! I'm struggling with my TS2000 along with a SignaLink SL-1+ to work with FLDIGI. First of all: I'm using this setup succesfully for a long time now with WSJT-X. My notebook is connected via USB to the TS2000 and via 3,5mm Headphone-Jack to the SignaLink. The SignaLink is connected to the TS2000 via the 13-ACC-Connector. ? Now to FLDigi: In order to make the connection between the TS2000 and my notebook I'm using FLRig. So far so good. This is my problem: My notebook (FLDigi) is hearing the signals but only through the microphone of my notebook. If I turn down the volume of the TS2000 no signals are being decoded.... Sending is about the same problem: If I hit the tune-button of FLDigi the TS2000 switches to transmit but the SignaLink doesn't switch to "PTT" and the TS2000 expects audio from the microphon.... I've tried so many settings but all in vain.... It's driving me nuts. Does anyone have a solution how to setup TS2000 along with the SignaLink SL-1+ to work with FLDigi? PLEASE HELP! ? VY73 de Ben (DL4DBM)
Herr K #37272 I think I've got the setup running now! THANKS TO ALL OF YOU! I'll give it a try tomorrow whenn the contest is over :-) It'll be my very first contact with FLDigi.... I'll let you know! ? 73 de Ben (DL4DBM)
Mike Black #37273 And preferably the ACC2 adapter is connected to pin 9 and not pin 13 so that the mic gets muted. Otherwise you have to turn down the mic gain to ensure you don't mix room noise with your signal. Mike W9MDB toggle quoted message Show quoted text On Sunday, October 13, 2024 at 09:23:28 AM CDT, Adrian Fewster <vk4tux@...> wrote: I agree, and have seen this happen before, cat ptt will enable the front audio path rather than the rear ACC audio path activated by vox. In wsjtx? vox was probably selected for ptt, hence why it worked. Signallink does the vox ptt switching without cat or comport input. 73 vk4tux On 13/10/24 23:52, gqwradio via groups.io wrote: ?? Ben: Ensure that in the FLrig set up, PTT by CAT is NOT selected. PTT by CAT takes precedence over any other PTT selections and CAT PTT will cause the 2000 to use mic and spkr for audio instead of audio to/from the 13 pin AUX connector. I hope that fixes your problem! 73 de Bob?? VE3YX On 2024-10-13 07:20, Herr K wrote: ?? Hello everybody! I'm struggling with my TS2000 along with a SignaLink SL-1+ to work with FLDIGI. First of all: I'm using this setup succesfully for a long time now with WSJT-X. My notebook is connected via USB to the TS2000 and via 3,5mm Headphone-Jack to the SignaLink. The SignaLink is connected to the TS2000 via the 13-ACC-Connector. ? Now to FLDigi: In order to make the connection between the TS2000 and my notebook I'm using FLRig. So far so good. This is my problem: My notebook (FLDigi) is hearing the signals but only through the microphone of my notebook. If I turn down the volume of the TS2000 no signals are being decoded.... Sending is about the same problem: If I hit the tune-button of FLDigi the TS2000 switches to transmit but the SignaLink doesn't switch to "PTT" and the TS2000 expects audio from the microphon.... I've tried so many settings but all in vain.... It's driving me nuts. Does anyone have a solution how to setup TS2000 along with the SignaLink SL-1+ to work with FLDigi? PLEASE HELP! ? VY73 de Ben (DL4DBM)
Adrian Fewster #37274 Yes, This was covered here on the group recently on msg ?Mar 23???#36250??? ? 73 ? vk4tux
Herr K #37312 Here's my feedback :-) After one week testing (in cold sweat) everything seems to work fine! But I have to "create" some macros, for QSOs as well as for contest.? Next part is making CW with Fldigi. As far as I have read articles, I've to get an USB-Winkeyer to get things working along with the TS-2000 and Log4OM. Can somebody please confirm this? Have a nice weekend! VY73 de Ben (DL4DBM)

Previous Topic Next Topic