¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Winfldigi
  2. Topics

FLRIG and ftdx10

 

Hi,

I wonder if there is something in flrig that when you change bands via set vfo that flrig sends the state of tuner on or off to the next band? Is this by intention or lack of some feature? I can change the bands manually via the radio controls and radio recalls the last known state for band instead. But when I do this in FLRIG it sets tune on. This is Rev 2.0.05. Can this be fixed so it recalls what is set in the radio per band?

73 N9SEO
 

The command sent is the "FA....;" sequence for setting vfo A, or "FB...;" for setting vfo B.? The C++ code for the FTdx10 is attached.? Look through it to see the command sequence for the supported functions.? The transceiver operation is probably similar to my FT-710, internally the radio stores all of the parameters for a particular band, but does not access those when an external vfo set command is received.

David

On Sat, Apr 19, 2025 at 9:01?PM N9SEO via <kayne.kruse=[email protected]> wrote:

Hi,

I wonder if there is something in flrig that when you change bands via set vfo that flrig sends the state of tuner on or off to the next band? Is this by intention or lack of some feature? I can change the bands manually via the radio controls and radio recalls the last known state for band instead. But when I do this in FLRIG it sets tune on. This is Rev 2.0.05. Can this be fixed so it recalls what is set in the radio per band?

73 N9SEO

FTdx10.cxx
FTdx10.cxx

 

I use FLrig extensively with my FTDX-10 and have not noticed the behavior that you mentioned.? I use the "band" buttons on FLrig to change the band on the radio (and to cycle through the band stacking on a single band) and I find that the settings per band (and per stack) are retained.? I have noticed a 2-3 second delay in the "tune" button reflecting actual setting on FLrig, i expect due to timing of the polling of the radio.
?
73 de Chip KD4C
 

Ok Dave Thanks, that must be the case then. It is actually a third party app talking to flrig over the api port where I noticed. Like KD4C noted that if I use the bands on the radio and/or the buttons for bands in flrig its fine.

Thanks all & 73

N9SEO

1 - 4 of 4