开云体育

The biggest gotcha is with Windows 11.? It adds some extra sound configuration capabilities that require configuring which were not available or required under Windows 10.

In Windows 10, all you had to do for the audio path was select the proper USB Audio Codec entry in fldigi audio settings.? Under Windows 11 this is likely to be insufficient and you may find it doesn't work.

In Windows 11, they added the ability to configure in the Sound Settings for each application which? audio source it should use.? If Windows points the apps to the "default" audio source, which is the default behavior, then it doesn't matter which audio you have configured in fldigi. It will get what Windows gives it.

You will want to go into sound settings and be sure that your USB Audio Codec is not set to be the default for either audio or communications (phone calls).

Then launch the ham radio app (fldigi, js8call, wsjt-x, Vara Modem, etc.) and in the sound settings you can configure those apps to use the rig's USB Audio Codec.

You can also go into sound settings and rename the rig's USB Audio Codec to include the rig name. This is handy if you have multiple rigs so when they are connected you would see "FT-710 Microphone" or "TS-590SG Speaker" instead of the standard "USB Audio Codec" label.

73 de AE4ON