开云体育

Morning All, I bought a wagon last March that has blown 225 V6 installed. I bought a 225 block with the idea of building a new one. I am now toying with idea of putting a L226 back in as was originally.
I have a good running motor ready to go. Problem is original mounts were cut out. Question is, are reproduction mounts available or do I need to have them made?
I have a chassis from a 1962 FC150. Would mounts be the same as a 1960 wagon? If so I could use them. The location should not be an issue as I can see where old mounts were fastened to wagon chassis. Any advice at this point would help.
Thanks,
Scott

Scott,

Here is a link to some pictures of my motor mounts - 226 1962 4x4
wagon.



Maybe they can help you determine what you need. It looks like the
driver and passenger sides are different. I can take more pictures if
needed and take measurments.

Good luck,

Bruce

Bruce, that is a nice clean looking frame. How did you prep it?

Thanks,

Bill
Lake Stevens, WA
'58 Utility Wagon 4x4 "Scallywag"
'59 Utility Wagon 4x4

--- In WillysTech@..., "Bruce" <bjharkey@...> wrote:

Scott,

Here is a link to some pictures of my motor mounts - 226 1962 4x4
wagon.

Maybe they can help you determine what you need. It looks like the
driver and passenger sides are different. I can take more pictures

if

needed and take measurments.

Good luck,

Bruce