[WT] CJ2A Oil Filter Pipes

Sean Collins #149546 Martin: The 2nd hole is where Fram had you put it, if you were installing an aftermarket kit. Fram instructions & diagram: toggle quoted message Show quoted text I have a new question: The pipe that carries oil to the oil filter is connected to the the front most hole on the engine block. Is this a requirement or can I change the position to the second port from the front? This is because I feel the oil pipe will lay better fromt that port as it is not in the way of the fuel pump.
Martin Mead #149550 Sean, Thanks for the info - that seems to be exactly the set up I have. I think I will attempt to measure the oil pressure at both outlets when I get the engine running - hopefully next weekend. The body is off and access to the oil outlets is easier now. Martin '48 CJ2A Bourke Aus toggle quoted message Show quoted text ----- Original Message ----- From: Sean Collins To: WillysTech@... Sent: Sunday, September 23, 2007 1:06 PM Subject: Re: [WT] CJ2A Oil Filter Pipes Martin: The 2nd hole is where Fram had you put it, if you were installing an aftermarket kit. Fram instructions & diagram: >I have a new question: The pipe that carries oil to the oil filter >is connected to the the front most hole on the engine block. Is this >a requirement or can I change the position to the second port from >the front? This is because I feel the oil pipe will lay better fromt >that port as it is not in the way of the fuel pump. ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.484 / Virus Database: 269.13.22/1013 - Release Date: 17/09/2007 1:29 PM

Previous Topic Next Topic

开云体育

[WT] CJ2A Oil Filter Pipes