开云体育

Steve, send me a picture I had the same problem with a 2a starter and fix it but untill ai know what the Bendax spring looks like I will keep quite. Donald

steve & lynn <slg27@...> wrote: The starter on my '63 4WD PU would spin but apparently stopped engaging. I could start the engine by popping the clutch while rolling downhill... I pulled the starter out and the teeth on the starter and ring gear are not stripped.
I purchased a rebuilt starter from Kaiser Willys and it does the same thing. It appears to be identical as the original. I had a friend who is a mechanic look at it, and after pulling it out, put jumper cables on it. It spins fine but only seems to engage only about 1/4 to1/2 inch. He thought that the new one was defective, so Kaiser Willys was nice enough to ship it back. They claim it is fine and that they sell hundreds of starters. I reinstalled it when they sent it back, BUT still does the same thing. Not sure what to do next. Any suggestions would be greatly appreciated!
Steve





Support WillysTech -- Check out the WT Bookstore


_/ _/ _/ _/ _/ _/ _/ _/ WillysTech _/ _/ _/ _/ _/ _/ _/ _/
WillysTech Parts Board - Sell/Buy Vehicles and Parts

WillysTech Registry - Add your vehicle

WillysTech KnowledgeBase - Search the Archives

_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
Yahoo! Groups Links

I'm having the same problem on my 55 truck. It was
engaging fine, then stopped. Still spins like crazy.
I'd love to know what others think on this one.

Thanks


55 4wd truck
48 cj2a (titled in 49)


--- Donald Waugh <waughsbandsaw@...> wrote:

Steve, send me a picture I had the same problem with
a 2a starter and fix it but untill ai know what the
Bendax spring looks like I will keep quite. Donald

steve & lynn <slg27@...> wrote: The
starter on my '63 4WD PU would spin but apparently
stopped engaging. I could start the engine by
popping the clutch while rolling downhill... I
pulled the starter out and the teeth on the starter
and ring gear are not stripped.
I purchased a rebuilt starter from Kaiser Willys and
it does the same thing. It appears to be identical
as the original. I had a friend who is a mechanic
look at it, and after pulling it out, put jumper
cables on it. It spins fine but only seems to engage
only about 1/4 to1/2 inch. He thought that the new
one was defective, so Kaiser Willys was nice enough
to ship it back. They claim it is fine and that they
sell hundreds of starters. I reinstalled it when
they sent it back, BUT still does the same thing.
Not sure what to do next. Any suggestions would be
greatly appreciated!
Steve

[Non-text portions of this message have been
removed]



Support WillysTech -- Check out the WT Bookstore


_/ _/ _/ _/ _/ _/ _/ _/ WillysTech _/ _/ _/ _/ _/ _/
_/ _/
WillysTech Parts Board - Sell/Buy Vehicles and Parts

WillysTech Registry - Add your vehicle

WillysTech KnowledgeBase - Search the Archives

_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
_/ _/ _/ _/ _/
Yahoo! Groups Links






[Non-text portions of this message have been
removed]

____________________________________________________________________________________
Pinpoint customers who are looking for what you sell.