I made a drawing of my glove box pattern (about 20 minutes) but lost the
file (I'm not quite sure how). Let me just say that the stock glove box and
the plastic one from AE Miller are very similar. However, it took me only 2
hours to make mine, and I had all the necessary materials on hand, so it
cost me nothing. From the picture, I estimate that the stock box (and my
sheetmetal replica) is about 2" deeper. It is as deep as it is wide. The
Miller box looks like a reasonable option, but I will post a pattern for
anyone who wants the thrill of "rolling their own".
Rick G. in AZ
toggle quoted message
Show quoted text
-----Original Message-----
From: Rick48CJ2A@... [mailto:Rick48CJ2A@...]
Sent: Monday, June 28, 1999 5:23 PM
To: WillysTech@...
Subject: Re: [WT] Glove box
From: Rick48CJ2A@...
I know I made my own glove box, but if I had it to do over again I probably
wouldn't. I think first I would call these guys at:
They offer plastic (I know to some that's a sacrilege) glove boxes for the
trucks and wagons for $24.95
Rick S (TX)
------------------------------------------------------------------------
_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
WillysTech
NEW! Parts Buy/Sell/Swap Board
Vehicle FAQ Sheets
Parts Resource List
_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
