You "can" or "can't" sedge anything under it???
That's the thing I popped out from the front, while trying to remove the
bushing.
Rick G. in AZ
toggle quoted message
Show quoted text
-----Original Message-----
From: Arne Anderson [mailto:
[email protected]]
Sent: Tuesday, June 22, 1999 4:59 PM
To: WillysTech@...
Subject: Re: [WT] starter bushing removal, version 2.0
From: Arne Anderson <
[email protected]>
haven't really dug in to it officially just trying to get all the ideas
before
I dig in. What I did find is what seems to be a cap on the back side of the
bushing. Looks like it is pressed in but given the position and the tight
fit
of this cap I can wedge anything under it. Any other ideas would be great.
thanks
arne
Richard Grover wrote:
From: Richard Grover <grover@...>
My bell housing had a hole drilled through the lip, with a "slug"
press-fit
into the back. The slug popped out!
Rick G. in AZ
-----Original Message-----
From: K. R. [mailto:kr98664@...]
Sent: Tuesday, June 22, 1999 4:11 PM
To: WillysTech@...
Subject: Re: [WT] starter bushing removal, version 2.0
Dear Friends,
Another thought just hit me about the Hydro-Whacker I
mentioned earlier today. I've never had the starter
out so maybe this doesn't matter. But the forces
generated can be quite strong. I'm not sure what the
casting looks like where the bushing is mounted, but
use caution to prevent damage. I'd hate to hear a
reply that you broke a chunk off your bell housing.
Hoping I'm not too late,
Vern
48 CJ2A in Vancouver, WA
_
------------------------------------------------------------------------
_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
WillysTech
NEW! Parts Buy/Sell/Swap Board
Vehicle FAQ Sheets
Parts Resource List
_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
------------------------------------------------------------------------
_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
WillysTech
NEW! Parts Buy/Sell/Swap Board
Vehicle FAQ Sheets
Parts Resource List
_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
