At 08:06 AM 10/15/98 -0500, you wrote:
From: Ron C <radigan@...>
After rebuilding my T-90, and then doing it again because I forgot to put
the oil shield in
place, I have a question. I have the utility manual for Jeep vehicles but
it does not cover the
6-230 engine...which I have. In the exploded view, it shows a washer
betweeen the rear main
bearing and the gear which drives the transfer case but mine did not have
such a washer when
disassembling it. Is this because someone else left it off or is it not
used on my 62 pu.
Thanks
Ron Cox
62 PU 6-230
Ron,
I just rebuilt the t-90 on my 63 wagon with 6-230 and if memory serves me
well I did not have a washer either. Perhaps that goes with the 29 tooth gear.
By the way--do you know where I can get the bronze gear that drives the oil
pump/dist? mine is trashed and I expect it to fail momentarily.
Rob Wohleb
"63" 6-230 Wagon
"51" Wagon W/Stude V8
