开云体育

Mitch, Don't forget to change the user_setup.h file from the library. It can be different. See the sketch for details 73, Cor, PA0GTB

Mitch, I don't know if this solves your problem, but you can get version 2.2.14 of the TFT_eSPI library here: TFT_eSPI version

A friend admired my NTP Clock (dual) on my qrz.com web page. I volunteered to furnish him the pcb and I 3d printed him Bruce's nice box. The box came out GREAT! Since I had some ESP8266 modules extra

Mischief Managed.. It was the Farnsworth speed setting. I had 22WPM, 5 WPM Farnsworth. Not sure why so low as I haven't tried copying receive groups where it would matter. With 22/10, the delay is too

The delay depends on the Farnsworth speed as well, the longest it can get is 2.4s, but that requires 50WPM/3WPM (Code/Farnsworth), that seems like torture. At more normal speeds I definitely had the

4 WPM to 35 WPM, the delay stays about 2 seconds. -- Duane? ?KA1LM

Does the delay change when you change the speed? The code to send a single

I may have started us down the wrong road here. PRACTICE is the main "page", but the issue is in Practice .Send ...Copy One and Copy two This is where I see the 2-3 second delay in recognizing my

Duane, I noticed a delay too, and I think it is caused by the code in sendElements() always adding a character space after sending a string. This delay depends on speed settings, so not everyone will

The way to see the problem is to watch the PRACTICE/SEND character to display and hear the character being presented. As soon as the sound completes, hold down the Morse key. There is (on mine) a 2-3

Mine is pretty well instantaneous. Check your Configuration ==> Speed There are three settings. Perhaps this is the issue? Then try Configuration ==> Chk Spd. It will output Paris audio and visual.

In practice sending..the Tutor displays the character and its audio. It waits 3 seconds before it looks at the operator's key input. It is really frustrating to see the character, hear it and the

The Rio Hondo Amateur Radio Club has twelve Morse Tutors thanks to the great work of Bruce Hall W8BH and a lot of support and guidance from Ralph WB9ICF. Ralph had two kitted up already then I ordered

Hello Cor, PA0GTB, I am truly sorry that I cannot help you with a W8BH LC Meter PCB. I have heard about the expensive shipping rates and taxes on goods shipped to the EU. Hopefully, you will find a

Ken, Several PCB manufacturers?in China charge only $ 4,90 for 5 or 10 PCB But the shipping cost to Holland are about $ 16,00? exclude VAT Since July 2021 we have to pay VAT and Import Taxes extra

Hello Cor, PA0GTB, Actually, JLCPCB (China) only sends five (5) PCBs per order unless you order more. I ordered my W8BH LC Meter PCBs from OSH Park. They are ENID PCBs. They only send three (3) PCBs

Hi Ken, Yes i know. But i only need 1 PCB. When i order at one if the PCB manufaturers, i must order 10 Thats why i put my question here, hoping that someone has one to send me

Hello Cor, PA0GTB, Welcome to the group. The Gerbers for the W8Bh LC Meter PCB are available for download from: https://github.com/bhall66/LC-meter/tree/main/PCB The file to download is

Hello to you all, I just joined this group I like to build the LC Meter project from W8BH, so i'm looking for someone who can provide me a PCB for this project Who can help me with this and send me

I built the Morse Tutor, and wanted to drop by here and thank Bruce for a great project and excellent description. I am a fairly new ham, and really enjoyed the experience of getting the parts ($4.66