开云体育

Good Morning All: Reflector 014 has moved to a new location with a new IP number. The New IP is *149.28.215.50* The Western Reflector is back and ready for use. Thanks, Tim K6BIV

This note is for people who registered their callsign for D-STAR on the W6CX D-STAR gateway. If you need to modify your D-STAR registration info, that has been moved to the REGIST gateway which is

A great way to check if your callsign is still on W6CX or has been moved to REGIST is to go to https://dstar.info/query.html In your case, Trevor, your callsign has been successfully moved to the

Jim REGISTER rejected my registration because I am on the W6CX server. They said they are in the process of moving us over to REGIST. Mike Russel said he will delete my other registration so I can

Jim I just verified my D-Star registration on REGIST.? It says I am registered and approved by W6CX. Do I still need to register? Trevor

When power came back, our Digital Voice repeater on 145.0 failed to come back online. The Pi that controls it did come back and is functioning, but the RX and TX radios did not power up when power

Hi Jim and all. The Retevis brand of radios are a rebrand of the TYT line of DMR HT’s. I have used TYT DMR equipment (and analog) for over five years and only have good things to say about them.

<https://r20.rs6.net/on.jsp?ca=4e891674-812d-4e27-a3f9-2f699e32a093&a=1131514436760&c=bdd452a0-e9d3-11e8-a06d-d4ae5291bfcb&ch=bf50e080-e9d3-11e8-a073-d4ae5291bfcb> I am not endorsing and

TU all for input. In Tahoe skiing will try Dstar on return! 73 Roger N3RC

In DR Mode, the repeater tables specify the frequency and offset for each repeater. So the radio does not make use of standard offsets in DR mode, and as long as the pre-loaded data is correct, all

Jim The W6CX DV offset is not a standard offset, so the offset table in any radio would set the wrong offset. Trevor

Roger, Start by updating your callsign into the MY or MyCall field in both radios. You wisely set up what is sometimes called a “space” terminal because you pressed the space bar into the

I bought an IC-9700 a year and half ago mostly for sats but tried to get it up on Dstar too. Was able to hear some folks but never had any Qs. But now I bought? an IC-7100 for my RV and a hot spot

Trevor, Short answer: Yes, you need to re-register on another gateway when you decide to move your registration off W6CX. While I will keep W6CX registration database going until November, you can

Jim Guess when you have time, I will need you to help me move my call sign to regist. Do I need to create an account on regist. The registry show me on the W6CX gateway. Trevor WA6JAU?

You can again make your own changes to your D-STAR callsign registration info. Since the attached email was written, I have been able to install the ICOM Registration page on a cloud server.

Jim Here is the link for the Repeater book W6CX Repeaters. The multimode is listed.There may be a better link, this one has a drop down that you need to click on. Call Sign Search

Check to see if the repeater book shows our clubbrepeaters and if so let’s put this link in our newsletter! Vicki Zumwalt, N6KLS Next Generation Antennas and Antenna Research Telephone: 925

Repeaterbook.com is a very popular website people use to find out about repeaters. Our analog FM W6CX repeater is there of

I wrote this reply to a question on another group – the OP is thinking of getting into Digital Voice and is looking for suggestions regarding which mode (D-STAR, DMR or Fusion). I thought this