Digest Number 27

Ulrich Albrecht #75 Analog engines will run slower on DCC as the did with DC. It is in the nature of the way how analog engines are handled: A part of the DCC signal is stretched either in the positve or ngative part (depending on the direction of travel) to create a positive or negative bias in the signal. This bias is what drives the engine, but it can never reach the full strength of a DC-signal. Ulrich toggle quoted message Show quoted text On 2 May 2005 WiringForDCC@... wrote: There is 1 message in this issue. Topics in this digest: 1. anologe train runs very slow on dcc address oo From: "mhn_416" <mhn_416@...> ________________________________________________________________________ ________________________________________________________________________ Message: 1 Date: Mon, 02 May 2005 02:25:05 -0000 From: "mhn_416" <mhn_416@...> Subject: anologe train runs very slow on dcc address oo i have a digitrax operating system power on ytacks read 7.5volts x2=15volts.however when i try to run an anologe train on the address 00 the train runs very slowly i have tried dfferent anologe trains with the same result. any suggestions? peter ________________________________________________________________________ ________________________________________________________________________ ------------------------------------------------------------------------ Yahoo! Groups Links ------------------------------------------------------------------------

开云体育