开云体育

Tried the Digitrax group maybe someone here has an answer.

I have a similar configuration to yours ecxept all my throttles are
DT100R or DT100IR and one ancient DT100. I have noticed that when I
turn off power (the UP3/5s are powered) that the throttles show PS
or IDLE, not always the same display on each throttle. I
investigated a bit and couldn't come up with an explanation. So I
don't worry about it. It doesn't seem to affect battery life (I
leave the batteries installed all the time).

Dale.


--- In WiringForDCC@..., "Jim McMahon" <hotrains@n...>
wrote:

Tried the Digitrax group maybe someone here has an answer.
----- Original Message -----
From: "hotrains2001" <hotrains@n...>
To: <Digitrax@...>
Sent: Saturday, April 30, 2005 8:59 PM
Subject: [Digitrax] DT 300

i have a DCS 100 DB150 PM42 BdL162 Ur91.
My UP 3/5's are powered when i turn off the system with UP 3/5

still

powered My DT 400R &DT300R show PS my DT 300 no longer shows PS

it

used to it now shows IDLE.
Digitrax did not know what i should do other than turn it upside

down

& spank it.That hasn't worked.
Would appreciate any ideas.

Thank in advance.

Jim McMahon

Thanks dale i no longer feel alone.
This DT 300 pluged into the same up 5 seems to show idle or PS when ever it feels like.i don't know of battery life yet time will tell.

Jim