Mike...If your DCC bus runs are only 10 ft long in either direction you DON'T ndeed to do anything more. Just hook 'em up to the track and enjoy.
DonV
toggle quoted message
Show quoted text
-----Original Message-----
From: WiringForDCC@...
[mailto:WiringForDCC@...]On Behalf Of Michael
Sent: Friday, November 25, 2005 2:30 PM
To: WiringForDCC@...
Subject: [WiringForDCC] RE: Terminating Bus Ends
List,
Okay, now I am confused. I am by no way an electrical type person
but know enough to get myself into trouble. With that said...PLEASE
help me!
The way I interpret this thread of messages is that if I have a point
to point layout with the power, booster, command module, etc. located
in the middle of the run (in my case 10' in both directions) that I
need to put something on the ends of my "track power bus wires" (in
my case a red 14ga and a white 14ga) instead of just ending them on a
terminal block like I have done now (the layout is in the track
laying stages still). If so can someone tell me exactly what I need?
I ma an NSCALE modeler using ALL Digitrax DCC equipment including one
of their power supplies (I have 2 more if needed for future
expansion). Most of my decoders are Lenz with a few Digitrax throw
in the mix. I have a Chief Radio System with 5 throttles.
ANY HELP clarifying this before I burn it all up will certainly be
appreciated. I wiring diagram would be even better for an old guy
like me. THANKS in advance!
Mike Langford
SOO Line 1964-67
Yahoo! Groups Links
