If you are talking about the MRC Command 2000, that is DCC so switching to
another DCC system is going to be no different. Other than features of
course.
Todd
toggle quoted message
Show quoted text
-----Original Message-----
From: ivaraas [mailto:ivar-aas@...]
Sent: Monday, April 04, 2005 9:54 AM
To: WiringForDCC@...
Subject: [WiringForDCC] From Command 2000 to DCC
Hi!
I'm new to the forum. I'm 59 year, and live in Norway, having an US
type Model railroad. I have used Command control since the CTC16 in the
1980's.
I use Command 2000 now, but have planned to change to Easy DCC this
summer. Then I can by my dekoders much cheaper here in Norway. I'm using
Bruce Chubb's C/MRI and a PC, to drive my Dispatcher panel,
signals and swithes on the rairoad.
My railroad use 2 boosters, (cut in both rails between them)and my
detectors use about 30 blocks (cut in 1 rails). All my ground wiring
(both for trains and C/MRI) are connected together.
Does anyone know if I have to rewire my railroad?. Are DCC so very
different fram Command 2000?
Ivar Aas
Yahoo! Groups Links
