I recently had a unit work fine at home, but it didn¡¯t want to respond at the club until we had cleared the consisting¡
toggle quoted message
Show quoted text
On Sep 22, 2024, at 10:25?AM, PennsyNut <fan4pennsy@...> wrote:
Yes. Some decoders require OPS, some Direct and some POM. Just to change the loco number from 03 to xxxx. But there is no logical reason for a loco to work on MRC and not on Digitrax/or NCE.
All locos on "03"/from reset should operate on any system. That's what the NMRA set up and "all manufacturers must adhere to".
There must be something else that's the problem.
This is what I was taught and have always heard. So if someone has a better solution, we need it here.
Morgan Bilbo, DCC since 8/18. Model PRR 1952.
David Gibbons