Bachman offers a track system for this. Might be what you want.
Charles
toggle quoted message
Show quoted text
On Sep 23, 2021, at 8:27 AM, Don Vollrath <donevol43@...> wrote:
?Provide a human operator to watch the loco as it gets near the end of your test track and press the appropriate buttons on the DCC throttle to slow down, stop, pause(?), start up again in the opposite direction and repeat at the other end. (Simply pressing the fwd/rev button may not work on many loco decoders)
If you want it to be automatic you need to provide a location sensor near each end and something like the NCE mini-panel to generate the equivalent of button presses to command the action. If you are doing this for loco break-in it would help to use the same loco address.
DonV
