I solved the problem finally! The PSX instruction manual states that when there is a short, D12 led should stay on and not flash. My D12 was flashing on and off, which the instruction manual indicated that the booster did not support ¡°automatic reset.¡± As a result, I had to solder a jumper wire on the PSX boards between J7-1 and J7-2. Once I did that, problem was solved. Only downside is that when a short occurs, I have to manually reset the PSX by sending an accessory command to 997 in my throttle.
So apparently the new DCS210+ command/booster¡¯s do not support auto reset, at least with the PSX¡¯s.
I appreciate everyone weighing in and helping.
toggle quoted message
Show quoted text
On Aug 7, 2021, at 2:14 PM, Blair <smithbr@...> wrote:
?
Jim,
It happens only when he shorts one loop out.? I think the cycling
is just the DCS retries.
Blair
On 2021-08-07 13:21, Jim Betz wrote:
Robert,
? This sounds more like two cabs on the same address ... Jim
