¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: *** Pactor 3 connect from WB6ZDF on 7102.00 KHz at 2016-02-01 11:47 UTC ** Not showing in Analyzer


 

¿ªÔÆÌåÓý

Because that station did not send u a location (grid square) Don. I suspect the connection was counted but no RADAR plot.
73 de DoC
?

Sent: Monday, February 01, 2016 16:55
Subject: [rmshfanalyzer] *** Pactor 3 connect from WB6ZDF on 7102.00 KHz at 2016-02-01 11:47 UTC ** Not showing in Analyzer
?
?

*** Pactor 3 connect from WB6ZDF on 7102.00 KHz at 2016-02-01 11:47
UTC **
RMS Trimode 1.3.4.0 Salvation Army Abbostford Winlink Gateway
WB6ZDF has 120 minutes remaining with VA7TSA
{SFI = 101 on 2016-02-01 08:00 UTC}
*** MTD Stats Total connects = 0 Total messages = 0
[WL2K-3.2-B2FWIHJM$]
;PQ: 12304863
Wien CMS via VA7TSA >
;FW: WB6ZDF
[RMS Express-1.3.10.0-B2FHM$]
;PR: 69572394
*** Disconnected from WB6ZDF, CMS link ended
*** Sending 100 Baud FEC station identification
***
*** Disconnected from WB6ZDF, New Link direction: Disconnected
*** Sending Pactor Tuning/ID on 18107.0 KHz
*** Solar flux index via Internet {SFI = 101 on 2016-02-01 12:00 UTC}
*** Sending Pactor Tuning/ID on 18107.0 KHz
*** Active Pactor Channels reported to WL2K data base 2016-02-01 14:20:23
*** Solar flux index via Internet {SFI = 101 on 2016-02-01 16:00 UTC}
*** Sending Pactor Tuning/ID on 18107.0 KHz
*** Sending Pactor Tuning/ID on 18107.0 KHz

https://www.dropbox.com/s/p5upkmyex8npocl/Screenshot%202016-02-01%2008.54.31.png?dl=0

This station not showing in Analyzer?

73

Don Poaps
New Westminster, BC
VA7DGP

Join [email protected] to automatically receive all group messages.