Hi All,
On Mon, 12 May 2025 at 13:51, Anand Moon via groups.io
<linux.amoon@...> wrote:
Hi Quentin,
On Mon, 12 May 2025 at 12:36, Quentin Schulz <quentin.schulz@...> wrote:
Hi Anand,
On 5/9/25 7:45 PM, Anand Moon wrote:
Hi Quentin,
On Fri, 9 May 2025 at 17:21, Quentin Schulz <quentin.schulz@...> wrote:
Hi Neil, Anand,
On 5/9/25 9:57 AM, Neil Armstrong wrote:
On 09/05/2025 09:02, Anand Moon wrote:
Add conditional compilation for the usb5744_i2c_init() function based
on the CONFIG_DM_I2C configuration, to avoid compilation failure.
CC net/net-common.o
AR net/built-in.o
LDS u-boot.lds
LD u-boot
aarch64-linux-gnu-ld.bfd: common/usb_onboard_hub.o: in function
`usb5744_i2c_init':
/home/amoon/mainline/u-boot/amlogic/u-boot-maineline/common/
usb_onboard_hub.c:74:(.text.usb5744_i2c_init+0xfc): undefined
reference to `i2c_get_chip'
aarch64-linux-gnu-ld.bfd: /home/amoon/mainline/u-boot/amlogic/u-boot-
maineline/common/usb_onboard_hub.c:89:(.text.usb5744_i2c_init+0x1a0):
undefined reference to `dm_i2c_write'
aarch64-linux-gnu-ld.bfd: /home/amoon/mainline/u-boot/amlogic/u-boot-
maineline/common/usb_onboard_hub.c:96:(.text.usb5744_i2c_init+0x1c8):
undefined reference to `dm_i2c_write'
aarch64-linux-gnu-ld.bfd: /home/amoon/mainline/u-boot/amlogic/u-boot-
maineline/common/usb_onboard_hub.c:104:(.text.usb5744_i2c_init+0x1f0):
undefined reference to `dm_i2c_write'
Segmentation fault (core dumped)
make: *** [Makefile:1824: u-boot] Error 139
make: *** Deleting file 'u-boot'
Signed-off-by: Anand Moon <linux.amoon@...>
---
common/usb_onboard_hub.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/common/usb_onboard_hub.c b/common/usb_onboard_hub.c
index 1242513c631..92e3f3a92c9 100644
--- a/common/usb_onboard_hub.c
+++ b/common/usb_onboard_hub.c
@@ -30,6 +30,7 @@ struct onboard_hub_data {
int (*init)(struct udevice *dev);
};
+#if CONFIG_IS_ENABLED(DM_I2C)
static int usb5744_i2c_init(struct udevice *dev)
{
/*
@@ -109,6 +110,7 @@ static int usb5744_i2c_init(struct udevice *dev)
return 0;
}
+#endif
int usb_onboard_hub_reset(struct udevice *dev)
{
@@ -222,7 +224,9 @@ static const struct onboard_hub_data usb2514_data = {
};
static const struct onboard_hub_data usb5744_data = {
+#if CONFIG_IS_ENABLED(DM_I2C)
.init = usb5744_i2c_init,
+#endif
.power_on_delay_us = 1000,
.reset_us = 5,
};
I think you should completely disable usb5744_data in this case
I would recommend to go the same route as the Linux kernel which has a
special Kconfig option for it, c.f. USB_ONBOARD_DEV_USB5744 which adds
the necessary dependencies.
On Linux kernel, it needs to parse the device node with i2c-bus.
Seems like it does in U-Boot too? c.f. usb5744_i2c_init() with
dev_read_phandle_with_args with i2c-bus?
ok.
We probably should be careful and figure out which boards are actually
using the usb5744 and add this symbol to their defconfig so they don't
regress.
From my initial analysis configs/xilinx_zynqmp_kria_defconfig
which use CONFIG_USB_ONBOARD_HUB
I believe using DM_I2C to guard the code is the best approach.
it should be around .init() callback to guard this to work.
I disagree. The driver clearly supports the USB5744 and the driver is
compiled regardless of DM_I2C support which is required (as far as I
understood, maybe that's incorrect?) for being able to use USB5744? I
don't like hidden dependencies.
Okay, I will add a new configuration option to guard the code as done
in the Linux kernel.
Also, I believe Neil's point is we shouldn't try to probe the USB5744 if
there is no DM_I2C support, simply excluding .init() callback will
probably just render this "support" of USB5744 non-functional?
Let me debug this more, I will update the next version.
I need to check if this binds correctly to the USB hub reset.
I am trying to get the usb_onboard_hub to bind.
but this driver is not getting probed in the first place,
I am missing some configuration to get this working.
Hit any key to stop autoboot: 0
=> usb start
starting USB...
Register 3000140 NbrPorts 3
Starting the controller
USB XHCI 1.10
Bus usb@ff500000: 4 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
=> dm tree
...
mmc 1 [ + ] meson_gx_mmc | |-- mmc@ffe07000
blk 1 [ ] mmc_blk | | |-- mmc@...
bootdev 2 [ ] mmc_bootdev | | `-- mmc@...
simple_bus 11 [ + ] dwc3-meson-g12a | `-- usb@ffe09000
usb_gadget 0 [ ] dwc2-udc-otg | |-- usb@ff400000
usb 0 [ + ] xhci-dwc3 | `-- usb@ff500000
usb_hub 0 [ + ] usb_hub | `-- usb_hub
usb_hub 1 [ + ] usb_hub | |-- usb_hub
usb_hub 2 [ + ] usb_hub | `-- usb_hub
usb_mass_s 0 [ + ] usb_mass_storage |
`-- usb_mass_storage
blk 2 [ + ] usb_storage_blk |
|-- usb_mass_storage.lun0
partition 0 [ + ] blk_partition |
| `-- usb_mass_storage.lun0:1
bootdev 3 [ ] usb_bootdev |
`-- usb_mass_storage.lun0.bootdev
clk 2 [ + ] fixed_clock |-- xtal-clk
Thanks
-Anand
