Scott,
thank's for your example, which will be of great help.
I had some problems to connect to Quote.com until i updated the ContinuumX.ocx file to a more recent one. I have the file attached for everyone to try, if the older one does not work. Replace Scott's version with this one and the project should work.
Best regards,
croc
* REPLY SEPARATOR *
toggle quoted message
Show quoted text
On 07/10/2002 at 21:03 marinindextrader wrote:
Qcharts users wishing to integrate Qcharts data into their IB TWS
application, their is a new file in the files section. The project is
module oriented to afford portability. Much of the module work could
be accomplished in the direct Qcharts calls, but I set it up to keep
your main form clear of superfluous code. All the work is pushed out
to the module.
If you are not a Qcharts user, this Zip will be of no interest.
Title Name: QchartsExample.Zip
Link:
Zip Pack Includes: Entire sample project, Exe file, and extensive but
dated documentation, and the Qcharts OCX.
Let me know if you have OCX issues. The OCX normally ports with
Qcharts and QLink, and gets deposited either in the Qcharts
directory, or the Program Files/Common Files/Qcharts directory. If
you have issues check these locations first. Downloading QLink and
installing it usually registers the OCX properley. Remember, it isn't
enough to have the OCX, it needs to be registered with the system
registry in order for the IDE to see it in the components directory.
The project should port with the OCX on form, but I have included a
copy of the OCX for those having issues AND savy enough to do a
manual registration.
Again, an install of QLink should set things in order in terms of OCX.
Let me know if you have issues; I would be interested in feed back.
Scott
Owner
To unsubscribe from this group, send an email to:
twsapi-unsubscribe@...
Your use of Yahoo! Groups is subject to
