¿ªÔÆÌåÓý


Re: 1989 Toyota Seabreeze

 

Thanks for the reply!


On Tue, Apr 8, 2025 at 7:50?AM Buzz Lightyear via <buzzliteyear=[email protected]> wrote:
Unless you can do the repairs yourself or know someone who is willing to do them very
inexpensively, you are probably better off selling your ToyHome "as is."
?
Experience suggests you will not recoup the cost of the reconditioning in the price you get when you do sell it.
?
In the classic car hobby/business the standing advice is to buy a car that has already been reconditioned to
whatever standard you are seeking, because it will be much cheaper than reconditioning a clapped-out one.
?
Also, if you sell the rig "as is" and something goes wrong with the repairs, you;re not on the hook for it.
If you fix the rot and something goes awry after you sell it, the buyer may give you grief about it even
if you're not responsible for whatever happened.
?
Good luck,
?
Buzz L.
San Jose, CA
Former '86 Dolphin, '89 HiLux, and '96 Tacoma owner


Re: Brakes

 

Brakes and tires are a curious conundrum in that if you never use them in an extreme situation, the difference between The Good Stuff and The Merely Adequate Stuff is
mostly not relevant. However, when an extreme situation comes up, you may be glad you payed the extra money for The Good Stuff.
?
With respect to brakes, if the brakes are powerful enough to lock the wheels when you get on them hard, they are providing you all the braking any brand can
at any cost.
?
Where more expensive brands tend to create a difference is under conditions of sustained or repeated hard braking. The Good Stuff handles the
sustained high temperatures better than The Merely Adequate Stuff. Higher-priced brake parts may also last longer and/or have less tendency
to make noise and/or (in the case of rotors/drums) less tendency to warp, but those are secondary concerns.
?
My general philosophy in this area has been to buy parts with a reputable brand name (another poster cited Raybestos as an example) and
pick something indicated for "normal" driving or "heavy duty" if it's not dramatically more expensive. The truly high-end stuff tends to be useful
only to those in extreme situations (racing, frequent sustained downhill driving, etc.) and installing something that isn't labeled "Economy" hopefully
provides a higher safety margin than going the cheapest route possible.
?
As a real-world example, the last time I renewed my brakes on my daily driver Mazda, I splurged for drilled/slotted rotors and "ultra-high performance"
brake pads...and I've largely wasted my money. The brakes work fine (though the drilled/slotted rotors seem to create minor odd vibrations at times),
but I simply don't drive the car aggressively enough to realize the heat dissipation benefits compared to a "daily driver" set of brake parts.
?
You are free to choose your own cost/benefit analysis and go with what works for you.
?
Also note: You may want to buy your parts from a local brick-and-mortar store rather than online. Even with the most careful scrutiny of application
guides, sometimes you get the wrong parts. For example, I had a Nissan where the front pads for the Made-in-Japan model with ABS were different
than the brake pads for the Made-in-Tennessee model with ABS. Buying locally means you can bring in your old parts to check they match up
and/or easily return them if they're not correct.
?
Good luck,
?
Buzz L.
San Jose, CA
Former '86 Dolphin, '89 HiLux, and '96 Tacoma owner (and lifelong car nerd)


Re: Brakes

 

I tend to buy the better pads, especially? those that come with clips. For a few bucks more, my rig and safety are worth it. Most importantly, make sure rotors aren't worn, grease the slide bolts, and clean all parts that are reused. I also like to flush the lines as I compress the calipers, replacing displaced fluid. Do a total job, the pads are only a minor part of the process


On Fri, Apr 25, 2025, 8:04 PM Fred Kruitbosch via <freddk13=[email protected]> wrote:
Yes, I do realize that. Thanks for pointing it out however. And thanks for the heads up on Centric and the suggestions of Raybestos and Dynamic Fiction.?


Re: Brakes

 

Yes, I do realize that. Thanks for pointing it out however. And thanks for the heads up on Centric and the suggestions of Raybestos and Dynamic Fiction.?


Re: Brakes

 

aren't 5 lug and 6lug rotors different?? ? as in 1 ton-1/2 ton
--
rz


Re: Brakes

 

You do realize it must say for dual rear wheels. That said I like raysbestos and dynamic friction. Dynamic friction comes in several grades. Whatever you do just don't buy Centric. My rear shoes were machined wrong and didn't fit. They wouldn't take them back, said I was wrong. Owner of the company actually screamed at me on the phone and hung up on me. Bad company. Depends on how you drive too. Some people obviously use the brakes excessively. For most middle of the road cost is just fine
Linda S


Brakes

 

What's everyone's opinion on quality of brake parts to buy. On Rock Auto I see rotors from $10 (wholesaler closeout) to $113. Daily driver, economy, fully coated, high performance. And a ton of choices. Do I just choose something in the middle, like I usually do, lol. Or because of the weight we carry, do I spend closer to the top?


Re: Printing

 

Screenshot on a microsoft desktop: right click mouse on the edge of the screen. Drop down menu appears , click "Take Screenshot". A little face box appears , pull the face corners out to frame the text you want to copy, press copy then enter/paste onto a word page, and size to your liking.

Screenshot on an android phone: enable in settings the bottom screen toolbar that includes a back button on the left and the screenshot button on the right. This will screenshot the entire visible page, you can't pick only the area you want.

I don't know how it is done on apple macintosh? I phone, sorry


Re: Printing

 

WIth a mac you choose command, shift and 4 at the same time. A small + with a circle in it will appear when you release the keys. Then you move the little marker on the screen with the trackpad down drag towards the diagonal corner until everything you want to screenshot is in the gray square. Then release. Then go to finder and it will show up in desktop. You can then drag that into your word doc.

I don't know how to do it on a PC. You'd have to google.?

Liz


Re: Printing

 

Hi-how do you screen shot? ?Sorry, we are computer 101 drop outs-?


On Sun, Apr 20, 2025 at 8:35?AM Robert Himler via <binrydin=[email protected]> wrote:
Another way would be to screenshot the text you want and paste it in to word and resize it to fit.


Re: AC outlets no power

 

Very good and you learned more about your rig in the process. I call that a success!


On Sun, Apr 20, 2025, 3:04 PM DaveM via <davemisunas=[email protected]> wrote:
While trouble shooting lost power to 3 AC outlets and refrigerator... using a voltmeter at the circuit breakers? which tested ok and do pass power out towards AC outlets...The wires behind ac/dc panel (under seat of Dinette whete traced to another ac outlet with a GFI which had tripped, pushed reset button and power returned to all ac outlets.... All these years I never new there is an AC outlet on the side of Dinette seat, It has been hidden by storage box on the floor under the table.


Re: AC outlets no power

 

While trouble shooting lost power to 3 AC outlets and refrigerator... using a voltmeter at the circuit breakers? which tested ok and do pass power out towards AC outlets...The wires behind ac/dc panel (under seat of Dinette whete traced to another ac outlet with a GFI which had tripped, pushed reset button and power returned to all ac outlets.... All these years I never new there is an AC outlet on the side of Dinette seat, It has been hidden by storage box on the floor under the table.


Re: Printing

 

Another way would be to screenshot the text you want and paste it in to word and resize it to fit.


Re: Printing, addition comment

 

I signed into the group using my laptop today (instead of my cell phone), and was able to find my way to FILES. And even though I do not have Microsoft WORD loaded, I was able to open and use 'Control P' to print the REPAIR AND REFURBISHING TASKS list! ... I hope this can help others who struggle with printing. This is such a great wealth of information, within this group...thank you all for your contributions!
?
I will be providing the list to anyone who works on our rig.? ? :-)?
?
?


Re: Printing

 

I would get the cursor in the email, hit 'ctrl?+ a', that will mark it all.?
Then I'd 'ctrl?+ c' to copy all that was marked.
I'd open?a blank 'notepad', put the cursor in it and hit 'ctrl?+ v' to copy it to the notepad text
I'd clean it up as needed then do a 'ctrl?+ a' to mark all the corrected text
I'd 'ctrl?+ c' to copy it all (you're copying text)
I'd go to the blank Word Doc, put the cursor in it and hit 'ctrl?+ v' to paste the text into the Word Doc.
Then I'd see if I could fix it.
Then I'd go to the email list and see if I could find some help? :-)

Good luck.



On Sat, Apr 19, 2025 at 5:05?PM Julia via <jgenevy=[email protected]> wrote:
I too have trouble "printing" and copying and pasting from this site.? My trouble is in saving "discussions about topics" I want to save onto a Word Doc I started when it was Yahoo Groups.? It is about 34 pages now.

I use mouse to copy and paste the discussions over to the Word Doc, but when I do, the boundaries of the discussions page is wider than the Word Doc, and the left edge does not appear on my Word Page.??

?I know how to expand the Word margins, but the pasted over text was not created in Word, and the pasted over appears in BLOCKS OF TEXT that the margins are in the block, not the line.? So when I view and print the Word Doc to show a mechanic, the left edge of the text is missing.? There are other UN wieldy problems with pasting over from this page, to a Word page, that I cannot manage like a Word Doc, like cannot lessen the space between paragraphs on my Word Doc.? I am sure some of you know what I am talking about.??

--
Julia - Scottsdale, AZ


Re: Printing

 

I too have trouble "printing" and copying and pasting from this site.? My trouble is in saving "discussions about topics" I want to save onto a Word Doc I started when it was Yahoo Groups.? It is about 34 pages now.

I use mouse to copy and paste the discussions over to the Word Doc, but when I do, the boundaries of the discussions page is wider than the Word Doc, and the left edge does not appear on my Word Page.??

?I know how to expand the Word margins, but the pasted over text was not created in Word, and the pasted over appears in BLOCKS OF TEXT that the margins are in the block, not the line.? So when I view and print the Word Doc to show a mechanic, the left edge of the text is missing.? There are other UN wieldy problems with pasting over from this page, to a Word page, that I cannot manage like a Word Doc, like cannot lessen the space between paragraphs on my Word Doc.? I am sure some of you know what I am talking about.??

--
Julia - Scottsdale, AZ


Printing

 

I struggle using this site, so hope I am not duplicating my request.
I want to print the extensive 'things to check' list. Can the list be emailed, then printed?
Rhonda?
?


Re: AC outlets no power

 

Dave, if you are not familiar with 120 AC, you probably want to get help from some one who is. If you suspect it's the breaker, disconnect the shore power and use a multi meter to check for continuity of the breaker. This is the safest way to go. You can use this technique to check your power cable as well. It could also be faulty wiring. Lots of possibilities. Good luck, be careful.? Doug


On Wed, Apr 16, 2025, 4:02 PM DaveM via <davemisunas=[email protected]> wrote:
Greetings...
Lost power to the 3 AC outlets... they where ok this morning. DC appears to be fine.

AC Power is coming into house,?
circuet breaker on ac/dc panel are not tripped.?
I reset them anyway.
Generator gives same results.
Did not see a GFI.

Suspect circuet breaker or faulty AC/DC panel.

Any ideas????

1990 Winnebago, Itasca, spirit,?
20 feet, sink and cook top on passenger side,
refrigerator and shower on driver side
Bathroom in back. Breaker panel under dinette seat.

Dave


AC outlets no power

 

Greetings...
Lost power to the 3 AC outlets... they where ok this morning. DC appears to be fine.

AC Power is coming into house,?
circuet breaker on ac/dc panel are not tripped.?
I reset them anyway.
Generator gives same results.
Did not see a GFI.

Suspect circuet breaker or faulty AC/DC panel.

Any ideas????

1990 Winnebago, Itasca, spirit,?
20 feet, sink and cook top on passenger side,
refrigerator and shower on driver side
Bathroom in back. Breaker panel under dinette seat.

Dave


Re: 1989 Toyota Seabreeze

 

What about the rehab job has you feeling as if you can¡¯t do it yourself?