This was supposed to be my first post but it got returned undeliverable. Yesterday's posts make more sense with this one before it . I cut and painted two plexiglass rectangular sheets to cover the existing sunrader body holes. Used butyl tape or silicone sealant and screws to attach to the body. But first I wired the four LED trailer lights as follows, all four are wired as running lights. The two outer are blinking turn signals, the inner two are brake lights. You need to replace the stock blinker module with an LED blinker module. It's located in the driver side kick panel. I used three 3" wires each one with a male and female spade connector, to attach the LED flasher to the flasher socket. I used two LED spot lamps mounted under the window and angled slightly outwards for the backup lights, they are great for backing into a dark wooded camp spot . But you can also get these 6" oval lights with backup in each light?
